SimBiology | simulation tolerance fails at beginning if time increased
1 vue (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Yash Jawale
le 10 Juin 2019
Modifié(e) : Arthur Goldsipe
le 19 Août 2019
I have built a model in SimBiology. I works fine say, if time is 1250 seconds. But it gives "Integration Tolerance Not Met" error at 10^-3 sec if time is increased to 1500 sec.
I am using "ode15s (stiff/NDE)" solver with default settings.
0 commentaires
Réponse acceptée
Arthur Goldsipe
le 10 Juin 2019
Modifié(e) : Arthur Goldsipe
le 19 Août 2019
My guess is that you are encountering the problem described in the tip on the AbsoluteToleranceStepSize reference page. The suggestion there is to update your simulation settings by manually setting AbsoluteToleranceStepSize to a small value. My suggestion would be to start with a value of 1e-5 and see how that works. If that results in the same error message, try 1e-6, and so on.
0 commentaires
Plus de réponses (0)
Communautés
Plus de réponses dans SimBiology Community
Voir également
Catégories
En savoir plus sur Scan Parameter Ranges dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!