Error 127 and binary output for Parrot Mambo

1 vue (au cours des 30 derniers jours)
Jahsiah Sanders
Jahsiah Sanders le 17 Juin 2019
I've been having trouble with a couple of errors I cannot seem to fix in MATLAB. I've encountered the errors: "Error 127" and the "Failed to generate all binary outputs" error. Ive tried all the methods I've seen online and im still at a lost. Ive added the code it gives me below and as a text file. === Build (Elapsed: 47 sec) ===
### Starting build procedure for model: parrot_gettingstarted
Error:"/home/taskinpadir/Documents/MATLAB/SupportPackages/R2019a/3P.instrset/ev3sourcerylite.instrset/arm-2009q3/bin/arm-none-linux-gnueabi-gcc" -c -MMD -MP -MF"parrot_gettingstarted.dep" -MT"parrot_gettingstarted.o" -DDELOS -DDELOS_EDU -fPIC -Wall -save-temps -DMODEL=parrot_gettingstarted -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -DUNIX -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DDELOS -DDELOS_EDU -DEXTMODE_DISABLETESTING -DEXTMODE_STATIC_SIZE=16384 -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DPARROT_LINUX_COMM -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -DMW_HAS_OPTICAL_FLOW_LOGIC -DSTOP_TIME=100 -DMAMBO=1 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DDELOS -DDELOS_EDU -DEXTMODE_DISABLETESTING -DEXTMODE_STATIC_SIZE=16384 -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DPARROT_LINUX_COMM -DSTACK_SIZE=64 -DRT -DSTOP_TIME=100 -DMAMBO=1 -DMODEL=parrot_gettingstarted -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -DUNIX -I/home/taskinpadir -I/home/taskinpadir/parrot_gettingstarted_ert_rtw -I/usr/local/MATLAB/R2019a/extern/include -I/usr/local/MATLAB/R2019a/simulink/include -I/usr/local/MATLAB/R2019a/rtw/c/src -I/usr/local/MATLAB/R2019a/rtw/c/src/ext_mode/common -I/usr/local/MATLAB/R2019a/rtw/c/ert -I/home/taskinpadir/Documents/MATLAB/SupportPackages/R2019a/toolbox/target/supportpackages/parrot/include -o "parrot_gettingstarted.o" "parrot_gettingstarted.c"
/bin/sh: 1: /home/taskinpadir/Documents/MATLAB/SupportPackages/R2019a/3P.instrset/ev3sourcerylite.instrset/arm-2009q3/bin/arm-none-linux-gnueabi-gcc: not found
gmake: *** [parrot_gettingstarted.o] Error 127
### Build procedure for model: 'parrot_gettingstarted' aborted due to an error.
Error:Error(s) encountered while building "parrot_gettingstarted":
### Failed to generate all binary outputs.

Réponses (2)

Eslam Abouselima
Eslam Abouselima le 14 Jan 2022
I had the same problem which is due to Arm-none-linux-gnueabi-gcc cannot compile ARM's 32-bit library under 64-bit system. The solution which worked for me is to write the following lines in the command window:
sudo apt-get install libgl1-mesa-dri:i386
sudo dpkg --add-architecture i386 && sudo apt-get update && sudo apt-get install ia32-libs
apt-get update
sudo apt-get install lib32ncurses5 lib32z1

bouboule
bouboule le 16 Mai 2021
Same problem here !

Catégories

En savoir plus sur Parrot Minidrones dans Help Center et File Exchange

Produits


Version

R2019a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by