Simulink model of the same is attached here.
Forward and Inverse Kinematics for robot
117 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Hello,
Hope you are doing well.
I am verifying the output of my forward kinematics through inverse kinematics and the results are not as desired. As the output of my inverse kinematics is not coming out to be the same as the input of forward kinematics.
The D-H parameters of manipulator is given as:
alpha a theta d
Link 1 -90 0 theta1* d1
Link 2 0 a2 theta2* 0
Link 3 0 a3 theta3* 0
Functions used are:
Forward kinematics:
function ph = forward_kinematics(q)
%input: [q1 q2 q3]
l2 = 0.28;
l3 = 0.2;
d1 = 0.03;
q1 = q(1);
q2 = q(2);
q3 = q(3);
ph = zeros(3,1);
ph1 = l2*cos(q1)*cos(q2)+l3*cos(q1)*cos(q2+q3);
ph2 = l2*sin(q1)*cos(q2)+l3*sin(q1)*cos(q2+q3);
ph3 = d1-l2*sin(q2)-l3*sin(q2+q3);
ph=[ph1;ph2;ph3];
end
Inverse kinematics
function q = inv_kinematics(ph)
%input: [ph1 ph2 ph3]
l1 = 0.05;
l2 = 0.28;
l3 = 0.2;
d1 = 0.03;
ph1 = ph(1);
ph2 = ph(2);
ph3 = ph(3);
r=sqrt(ph1^2+(ph3-d1)^2);
alpha=acos((r^2+l2^2-l3^2)/(2*r*l2))
q = zeros(3,1);
q1=atan2(ph2,ph1);
q2=atan2(ph1,ph3-d1)-alpha;
q3=atan2(ph1-l2*sin(q2),ph3-d1-l2*cos(q2))-q2;
q=[q1;q2;q3];
end
4 commentaires
Réponses (3)
Mohd Musharaf Hussain Sarwari
le 13 Fév 2021
I WANT SCARA ROBOT forward-and-inverse-kinematics MATLAB CODE
2 commentaires
Krishna Akella
le 28 Juin 2019
Hi Mohsina,
I don't know the answer to your question but I looked at your model and I have a few observations. In your model I assume the inputs to your forward kinematics function are the joint angle values and the output is the end effector location. And I assume the inputs to your inverse kinematics function is the end effector location and the outputs are the joint values.
If this is correct, then why would you not pass the output from forward kinematics back to your inverse kinematics function to validate that you are getting back the same joint values?
I made this change and it seems like the first output value matches.
The reason the other joint angles might still not be matching is because you could have multiple solutions to worry about. For example, in the computation of your inverse kinematics function, you have
r = sqrt(ph1^2+(ph3-d1)^2);
There could be two solutions to the sqrt function. A positive and a negative value. And MATLAB returns the positive value. Similar thing is true for other functions like acos, where multiple angles can give the same result. All these will result in multiple solutions to result in the same end effector location.
Regards,
Krishna
1 commentaire
Ram Bodhe
le 12 Mai 2020
function q = inv_kinematics(ph)
%input: [ph1 ph2 ph3]
l1 = 0.05; l2 = 0.28; l3 = 0.2; d1 = 0.03;
ph1 = ph(1); ph2 = ph(2); ph3 = ph(3);
r=sqrt(ph1^2+(ph3-d1)^2); alpha=acos((r^2+l2^2-l3^2)/(2*r*l2))
q = zeros(3,1); q1=atan2(ph2,ph1); q2=atan2(ph1,ph3-d1)-alpha; q3=atan2(ph1-l2*sin(q2),ph3-d1-l2*cos(q2))-q2;
q=[q1;q2;q3];
end
1 commentaire
Voir également
Catégories
En savoir plus sur Robotics dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!