Plot BER & SNR of LTE

5 vues (au cours des 30 derniers jours)
Mohammed Alhamiri
Mohammed Alhamiri le 6 Août 2019
Commenté : Mohammed Alhamiri le 11 Août 2019
Hello,
I'm trying to plot BER for various values of SNR for LTE communication system, but I'm facing some difficulties since I'm new with Simulink Matlab. The following link is the mdl. file for LTE
Could you please help me with that? or if you have the m. file (Matlab code) for LTE with BER, I will be happy to have it.
Best regards,
Mohammed Al-Hamiri

Réponse acceptée

Kaashyap Pappu
Kaashyap Pappu le 9 Août 2019
To obtain the BER values for a LTE channel, refer to the example elaborated upon here. Click on “Try it in MATLAB” to get the M-File. The GUI can be used to visualize the plots of BER against Eb/No.
Alternatively, if you require data from the Simulink model, use a “To Workspace” block and connect to the output port “ber”, set the output variable name, and select an appropriate Save Format. This is elaborated upon here. This exports the BER values to the MATLAB workspace. Use the “plot” function elaborated here to plot the variable that has been exported from Simulink. Change the SNR or Eb/No values in the “AWGN” block for experimentation.
Furthermore, the block prior to the “AWGN” block can be replaced by the “MIMO Fading Channel” block elaborated here.here. Alternatively, you could also use the “SISO Fading Channel” block elaborated here. Select the Rayleigh Distribution for the blocks here. Select the Rayleigh Distribution for the blocks.
  1 commentaire
Mohammed Alhamiri
Mohammed Alhamiri le 11 Août 2019
Thank you so much for your help.

Connectez-vous pour commenter.

Plus de réponses (0)

Catégories

En savoir plus sur LTE Toolbox dans Help Center et File Exchange

Tags

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by