Sample time settings to read data correctly from Spreadsheet

2 vues (au cours des 30 derniers jours)
Phivos Koumides
Phivos Koumides le 12 Août 2019
Commenté : Phivos Koumides le 11 Août 2020
I've created a model in Simulink and Simscape physical system (thermal, thermal liquid). This model needs to be simulated for a duration of a year (365 days). It is important to have a sample time of 3600sec or less. The model includes a set of data inside a spreadsheet (From Spreadsheet block), which has data on an hourly basis (24*365=8760 data sets). When simulating, it is clear that the data read from the spreadsheet are collected as if they include data at a sample rate of 1sec rather than 1 hour. As a result, within 8760 samples the data run out, which is actually after a simulation duration of 8760/60=146min=2.4hours.
No matter how I set up the solver, variable step, fixed step, the sampling rate is the same. I have even experimented with all possible settings in the "From Spreadsheet" block (sample time) but still the same results.
Any ideas on how to set this up so I can simulate for this yearly duration but utilize spreadsheet data every 3600 samples (1hr)?

Réponse acceptée

Steve Miller
Steve Miller le 10 Août 2020
I suspect the easiest way is to multiply your time vector by 3600.
If you upload the Excel spreadsheet, we can test further.
  1 commentaire
Phivos Koumides
Phivos Koumides le 11 Août 2020
Thanks Steve, I figured that out. I probably should have updated my comments then.

Connectez-vous pour commenter.

Plus de réponses (0)

Catégories

En savoir plus sur Thermal Liquid Library dans Help Center et File Exchange

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by