Effacer les filtres
Effacer les filtres

I can not run the Delfino TMS320F28379D Launchpad in external mode in order to tune parameters.

3 vues (au cours des 30 derniers jours)
My simulink model is generating a PWM signal with a duty cycle indicated by the constant block.
It works fine when I deploy to hardware, but is not working when I try it in external mode. I want to modify the duty cycle while it is running.
This is what I have set in configuration parameters;
I am attaching the simulink model as a zip file too.
Any help would be appreciated.

Réponses (1)

Venkatesh Chilapur
Venkatesh Chilapur le 16 Oct 2019
There is a check box (Boot from flash) in the first image file that you have attached. Please enable the check box and try to run in external mode. I tried your model and could update the duty cycle and the only change I did is enable the check box.
Venkatesh C
  2 commentaires
Jafet Martínez
Jafet Martínez le 16 Oct 2019
I have enabled the Boot from flash option and tried running in external mode but I have the following error message
That was the only thing I changed, but it is still not working for me.
Thanks in advance for the help.
Jafet Martínez
Jafet Martínez le 16 Oct 2019
Mi problem appears to be fixed. I can now run in external mode and tune the duty cycle while running. What I did was to reinstall CCS with an older version, the 7.4 as that is the one compatible with Matlab R2018a according to what I read in another post here. There is detail and that is that I still have error messages when enabling the Boot from flash box, so I do not have that enabled at the moment, but I can run in external mode.

Connectez-vous pour commenter.




Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by