How to linearize the plant for tuning the parameters of the PID Controller?
5 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
In my design, there is a problem coming that the plant cannot be linearized for tuning the parameter of PID controller.
So, How can I linearize the plant?
PFA regarding my design:
0 commentaires
Réponses (1)
Rhea Chandy
le 3 Fév 2021
Modifié(e) : Rhea Chandy
le 3 Fév 2021
Hi Ayush
I tried to linearise the plant in the model you attached, but I didn't find the error you described. I linearised the PWM generator as an example block, and generated a Bode Response. I've attached it below for your reference if necessary.
You can refer to the instructions detailed here, Linearize Plant Using Model Linearizer, for details on using the Model Lineariser. You can also linearize a plant subsystem at Command Line in a Simulink model using the linearize command.
If you are still continuing to face an error, a more detailed description of the steps you took and the errors would be helpful.
0 commentaires
Voir également
Catégories
En savoir plus sur PID Controller Tuning dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!