Make array of coordinates from matrix and make the animation of moving coordinate one by one

I have the code like this

function dx = trainfinalmodel(t,x)

%Parameter Massa
m1 = 8095; % massa train set 1 dalam kg
m2 = 8500; % massa train set 2 dalam kg
g  = 10;

%Parameter Gaya
f1 = 205.10^3; % dalam N
f2 = 302.10^3; % dalam N

c_0_1 = 0.01176;
c_1_1 = 0.00077616;
c_2_1 = 4.48 ;

c_0_2 = 0.01176 ;
c_1_2 = 0.00077616;
c_2_2 = 4.48;

v_0 = 300;

hstar = 120;

a_1   = -1./m1.*(c_1_1 + 2.*c_2_1.*v_0);  
a_2   = -1./m2.*(c_1_2 + 2.*c_2_2.*v_0); 

a_1_head = 1-(a_1.*hstar);
a_2_head = 1-(a_2.*hstar);
b = 1;

p_1 = -1./m1.*(c_0_1 - c_2_1.*(v_0).^2);
p_2 = -1./m2.*(c_0_2 - c_2_2.*(v_0).^2);

x = [x(1);x(2);x(3);x(4)];

A = [0  a_1_head      0        0;
     0     0          0        0;
     0 (a_2_head - 1) 0 a_2_head;
     0      0         0        0
     ];
 
B = [-b.*hstar         0;
      b                0;
      0        -b.*hstar;
     -b                b
     ];
 
U_t = [f1; f2;];
 
W = [((a_1 - 1).*v_0) - (p_1.*hstar);
     0;
     ((a_2 - 1).*v_0) - (p_2.*hstar);
     ((a_1 - 1).*v_0) - (p_1.*hstar);
     ];
 
dx = (A*x) + (B*U_t) + W;

end

and for the simulation

clear all, close all

tspan = [0:0.01:1000];
x0 = [0; 0; 100; 0];
[t,x] = ode45(@trainfinalmodel,tspan,x0);
plot(t,x)
legend('x1','x2','x3','x4')
title('Non Linear Model')
xlabel('Waktu(s)')
ylabel('Jarak(m)')

figure(2)
subplot(2,1,1);
hax1 = plot(t,x(:,1),t,x(:,3))
title('Posisi Rangkaian Kereta')
xlabel('Waktu(s)')
ylabel('Jarak(m)')
legend('x_1','x_3')
subplot(2,1,2);
hax2 = plot(t,x(:,2),t,x(:,4))
title('Kecepatan Rangkaian Kereta')
xlabel('Waktu(s)')
ylabel('Kecepatan(m/s)')
legend('x_2','x_4')

I get the graphics after that i want to know the array of coordinates from the graphics. After i get the array of coordinates, i want to make animation for the x y coordinates. So i can plot one by one coordinates. I plot the first and second coordinates, after that i erase the first coordinates and do it next untll all coordinates so i can get the animation when the coordinates is plot form the first untill the end. How i can simulate that?

Answer 1

[Kevin Joshi]

Please check the attached code.

[Ivan Dwi Putra]

thank you for the answer, but before i animated the plot, i need get the coordinate in array. How to get the coordinate from the plot?thank you

[Ivan Dwi Putra]

i just know use ginput to get coordinate, but ginput only to know one coordinate only

[Ivan Dwi Putra]

or get the array of coordinate from matrix. From the code, get the x matrix 100001x4 double. How i can get all coordinates from x1 until x4

my matrix x = [x1;x2;x3;x4]

in my plot only plot x so i confuse how i get coordinate x and y all my matrix

the coordinates is used to simulate the train is moving from one location to another location