How to combine a marker to a line and show in legend?
32 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Ashvinder Singh Gill Surmaish Singh Gill
le 12 Juin 2020
Déplacé(e) : Voss
le 20 Déc 2023
How do I combine the markers and line plot for the case below? Example : Magenta arteisk on the green line to be shown in the legend and subsequently.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/314882/image.png)
data = xlsread("diametercyclic1.xlsx") ;
%K = data(1,[1 3 5 7]) ; % factors
%data(1,:) = [];
s1 = data(1:132,1) ; f1 = data(1:132,2) ;
s2 = data(1:38,3) ; f2 = data(1:38,4) ;
s3 = data(1:12,5) ; f3 = data(1:12,6) ;
s4 = data(1:14,7) ; f4 = data(1:14,8) ;
%s5 = data(1:18,9) ; f5 = data(1:18,10) ;
figure
hold on
axis tight
theta_max = 2* pi ;
theta_min = 0 ;
theta_4 = linspace(theta_min, theta_max,132)' ;
N_terp = 1024;
theta_2 = linspace(theta_min,theta_max,N_terp)' ;
X_terp1 = spline (theta_4, s1, theta_2);
Y_terp1 = spline (theta_4, f1,theta_2);
theta_5 = linspace(theta_min, theta_max,38)' ;
X_terp2 = spline (theta_5, s2, theta_2);
Y_terp2 = spline (theta_5, f2,theta_2);
theta_6 = linspace(theta_min, theta_max,12)' ;
X_terp3 = spline (theta_6, s3, theta_2);
Y_terp3 = spline (theta_6, f3,theta_2);
theta_7 = linspace(theta_min, theta_max,14)' ;
X_terp4 = spline (theta_7, s4, theta_2);
Y_terp4 = spline (theta_7, f4,theta_2);
%theta_8 = linspace(theta_min, theta_max,18)' ;
%X_terp5 = spline (theta_8, s4, theta_2);
%Y_terp5 = spline (theta_8, f4,theta_2);
yyaxis right
ylabel('Force (N)');
xlim([0 6])
ylim([-100 200])
plot(s1,f1,'bx')
p1 = plot(X_terp1,Y_terp1,'-r','DisplayName','d=4.5mm')
p2 = plot(nan,nan,'r-', 'DisplayName', sprintf('max=%.2f N',max(f1)))
p3 = plot(nan,nan,'r-', 'DisplayName', sprintf('min=%.2f N',min(f1)))
plot(s2,f2,'r+')
p4 = plot(X_terp2,Y_terp2,'-m','DisplayName','d=6.0mm')
p5 = plot(nan,nan,'m-', 'DisplayName', sprintf('max=%.2f N',max(f2)))
p6 = plot(nan,nan,'m-', 'DisplayName', sprintf('min=%.2f N',min(f2)))
plot(s3,f3,'m*')
p7 = plot(X_terp3,Y_terp3,'-g','DisplayName','d=7.5mm')
p8 = plot(nan,nan,'g-', 'DisplayName', sprintf('max=%.2f N',max(f3)))
p9 = plot(nan,nan,'g-', 'DisplayName', sprintf('min=%.2f N',min(f3)))
yyaxis left
xlim([0 6])
ylim([-1000 2000])
plot(s4,f4,'go')
p10 = plot(X_terp4,Y_terp4,'-b','DisplayName','d=15.0mm')
p11 = plot(nan,nan,'b-', 'DisplayName', sprintf('max=%.2f N',max(f4)))
p12 = plot(nan,nan,'b-', 'DisplayName', sprintf('min=%.2f N',min(f4)))
%plot(s5,f5,'cs')
%p13 = plot(X_terp4,Y_terp4,'-c','DisplayName','')
%p14 = plot(nan,nan,'c-', 'DisplayName', sprintf('max=%.2f N',max(f5)))
%p15 = plot(nan,nan,'c-', 'DisplayName', sprintf('min=%.2f N',min(f5)))
grid on;
%xlim([0 0.0035])
%ylim([0 200])
ax = gca;
ax.XAxisLocation = 'origin';
title('Force vs Displacement (A)');
xlabel('Displacement (mm)');
ylabel('Force (N)');
lgd = legend([p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12],'Orientation','horizontal','Location','southoutside','NumColumns',3)
title(lgd,'Diameter,d')
set(gcf,'color','w');
0 commentaires
Réponse acceptée
Udit Pant
le 16 Juin 2020
Déplacé(e) : Voss
le 20 Déc 2023
Hi,
This can be achieved by drawing a plot with no data (nan) with the desired line and marker attributes. This way the plot won't be visible (due to nan) but the plot handle can be added to legend.
In your code, instead of adding p1 to the legend, you can create a new plot 'ph1' and add it to the legend.
ph1 = plot(nan, nan, 'r-x', 'MarkerEdgeColor', 'b', 'DisplayName','d=4.5mm');
Similarly, you can add plots with nan data and desired line & marker attributes for other plot handles as well. Hope this helps.
1 commentaire
Plus de réponses (0)
Voir également
Catégories
En savoir plus sur Scatter Plots dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!