Using fuel cell stack and battery with electrical domain

Is it possible to use the fuel cell stack and battery block (Simscape/Electrical/Specialized Power Systems/Electric drives/Extra sources) with the electrical domain in a simulink model ? I didn't find a block who would "link" the simscape electrical domain to these sources.

Thank you.

Answer 1

[Javier Gazzarri]

Hello Hugo,

Thank you for your question.

Please see if any of the Interface Elements in Simscape/Electrical/Specialized Power Systems/Fundamental Blocks/Interface Elements does what you are looking for.

The Specialized Power Systems blocks are built with a different technology than the Simscape Electrical blocks, hence the need for an interface block to be connected to each other.

Best regards,

Javier Gazzarri

[Hugo Meneu]

Thank you for your answer.

Hugo

Answer 2

[Juan Sagarduy]

Hi Hugo,

An alternative you can think of is to do everything in Simscape. The link below may be helpful. This complements Javier’s answer.

https://www.mathworks.com/matlabcentral/fileexchange/59343-fuel-cell-battery-driven-electric-motor-h2-transfer

Regards Juan