Passing an UIAxes handle to PlotFcn
4 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Mario Malic
le 20 Sep 2020
Modifié(e) : Mario Malic
le 29 Sep 2020
Hi guys,
I am having hard time wrapping my mind around anonymous functions. I am running an optimisation problem, and I would like to make the 'optimplotfval' function to plot on supplied UIAxes handle.
I know that I can create my own plot function or copy the optimplotfval and rename it, but I am wondering how to pass UIAxes handle to any of those cases.
I would be grateful for ideas.
Thanks.
Réponse acceptée
Adam Danz
le 21 Sep 2020
Modifié(e) : Adam Danz
le 21 Sep 2020
tl;dr use the OutputFcn method below.
Using a custom optimplotfval
"I would like to make the 'optimplotfval' function to plot on supplied UIAxes handle"
When PlotFcns is set to optimplotfval, the optimizer searches for an existing figure named 'Optimization Plot Function' and if it doesn't exist, it creates one. The optimization outputs are plotted on that figure and there is no option to pass an alternative axis handle.
However, you can specify your own plotting function that does contain an axis handle input but the 'Optimization Plot Function' figure will be created anyway even though it will be ignored. Therefore, this approach is not the one you want but I'll show it anyway JFF (just for fun).
options = optimset('PlotFcns',@(a,b,c)customOptimplotfval(app.UIAxes,a,b,c),'TolX',1e-7)
% Notice the axis handle passed here ^^^^^^^^^^
function stop = customOptimplotfval(ax,~,optiVals,~)
% Assumes this has already been executed: hold(app.UIAxes, 'on')
plot(ax, optiVals.iteration, optiVals.fval, 'm*')
stop = false;
end
Using OutputFcn to control plotting
To bypass the problems described above, use an OutputFcn to plot the results of each iteration of the optimization.
% Create demo uiaxes
app.UIAxes = uiaxes();
pause(3) % wait for axis to appear before the show's over.
% Important: apply "hold on" prior to running the optimization.
cla(app.UIAxes)
hold(app.UIAxes, 'on')
% Set up and perform optimization
options = optimset('OutputFcn',@(x,optiVals,state)outfun(app.UIAxes,x,optiVals,state),'TolX',1e-7);
% Notice the axis handle passed here ^^^^^^^^^^
fun = @(x)100*((x(2) - x(1)^2)^2) + (1 - x(1))^2; % Rosenbrock's function
x0 = [-1,2];
[x,fval] = fminsearch(fun,x0,options);
% Define OutputFcn
function stop = outfun(ax,~,optiVals,~)
% Assumes this has already been executed: hold(app.UIAxes, 'on')
plot(ax, optiVals.iteration, optiVals.fval, 'm*')
drawnow % optional; also try drawnow limitrate
stop = false;
end
3 commentaires
Adam Danz
le 22 Sep 2020
Yes, the fig is generated in fminsearch > callOutputAndPlotFcn.
callOutputAndPlotFcn then calls callAllOptimPlotFcns after the figure is generated and that function uses feval to apply the plotting function.
Plus de réponses (0)
Voir également
Catégories
En savoir plus sur Solver Outputs and Iterative Display dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!