Transient heat flux boundary condition in PDE toolbox
12 views (last 30 days)
I am modelling temperature distribution of a circular cylindrical rod with a plate. The model is very much similar to (https://au.mathworks.com/help/pde/ug/heat-distribution-in-a-circular-cylindrical-rod.html) model. In my model, I am using heat flux boundary condition at the edge 2 (interface of rod and plate) which is varying with time. I have set 298 K as atmospheric temperature and 910 K as initial temperature. It is expected that heat flux will be zero when the edge temperature will reach at atmospheric temperature. I have set the boundary condition as given in the following code. The results do not seem correct because the edge temperature reaches steady state at time t=1s for all initial temperatures (T_0 = 510K and 910K).
How can I solve the problem?
k = 1.3913; %Thermal conductivity [W/(mK)]
h_thick = 0.001; %Thickness of the plate [m]
T_amb = 298; %Atmospheric temperature [K]
T_0 = 910; %Initial temperature [K]
Ravi Kumar on 30 Sep 2020
Based on what you describe, it appears you are assigning heat flux on an interior edge. These are not boundaries of the domain so they won't be processed. Refer to https://www.mathworks.com/help/pde/ug/do-not-specify-boundary-conditions-between-subdomains.html