Can not install waijung blokset [SOLVED]

I cannot install waijung blokset.

I have an error like;

Unable to resolve the name LibraryBrowser.StandaloneBrowser.

Error in waijung.refreshLibraryBrowser

Error in install_waijung (line 62)

waijung.refreshLibraryBrowser;

You need to use matlab with no update. just use original setup eg. 2020b, 2020a, 2018a etc. Just dont set up update after matlab installation.

What should i do?

[Jerin Joy]

sir which version of matlab are you using ? i am also unable to use waijung blockset in my 2020b version after installation i cant find the waijung in simulink library.it worked fine in my 2016 version matlab.Is it that it only worlks for upto 2018 version as they say?

[delil codes]

You need to use matlab with no update. just use original setup eg. 2020b, 2020a, 2018a etc. Just dont set up update after matlab installation.

Answer 1

[FURKAN AKÇANLI]

i faced the same problem. i think the proplem is refreshing and targets updating. So, Firstly you should comment line, line 62.

then open the targets file and goto stm32f0 and stm32f4 open .m file at the both targets files. You will see a code like updateplugin, i think at 75. line. Comment lines too (both target files). then save all files and run it.

finally, the installation is finish, go to simulink -open the library browser and refresh or click fix link. Choose second option(it was starting with generate..)

However, İ think Aimagin.com is updating the waijung 1 program file. So maybe the problem will be solved, in the new version

Good Luck...

[delil codes]

Ty for your help. I solved the problem like; reinstalled matlab and not updated matlab version.

[Jerin Joy]

sir which version did you use. I,m facing similar issue in my 2018a version .The aimagin people say's it supports upto 2018a but this one still showing error.

[Vasavi Sai]

Hi FURKAN AKÇANLI

I followed your instructions and is installed perfectly but STM32 Targets are missing in the library browser.

Please help me in solving the problem.

Thank you

2021/06/12

[delil codes]

Hi @Jerin Joy you need to use matlab with no update. just use original setup eg. 2020b, 2020a, 2018a etc. Just dont set up update after matlab installation.

[delil codes]

Hi @Vasavi Sai, if you press F5 at Simulink Library Browser, you will see the "fix" button.

Then select second action "Generate ..." from following window.

[Merve ozdas]

Hi, I implied all steps that you say @FURKAN AKÇANLI but I tried again to run install waijung.m I got the same error, what can you advise to me?

[Sebastian Tobon]

This works for me with the latest version of waijung and matlab r2023b, thank you so much.

Answer 2

[Sunphong Thanok]

Please try with this version waijung_18_11a

https://drive.google.com/file/d/1PpYStNbHBo8S3V8UDjQjEVSZC7BNl47F/view?usp=drive_link

[Walter Roberson]

(This archive looks like it might be the blockset implementation.

Part of it has a number of MATLAB .p files, so it is not possible to examine their source.)

[Sunphong Thanok]

He ask about the install blockset. we can installed in the simulink with this file.

[Serhat Sarihan]

Hello, i have Matlab 2022b with waijung_18_11a. I have successfully installed Waijung Blockset. But when i create a simple led blinking model i received an error as follows:

D:\workspace\matlab\waijung_18_11a_Matlab202x\utils\aimagin\gnuarminc\_ansi.h(16): fatal error C1083: içerme dosyası açılamıyor: 'sys/config.h': No such file or directory

NMAKE : fatal error U1077: 'cl -c -nologo -GS -W4 -DWIN32 @test_2022b_comp.rsp -D_MT -MT -D_CRT_SECURE_NO_WARNINGS -DTID01EQ=0 /DNDEBUG /Od /Oy- -DMODEL=test_2022b -DNUMST=2 -DNCSTATES=0 -DMAT_FILE=0 -DINTEGER_CODE=0 -DONESTEPFCN=1 -DTERMFCN=1 -DHAVESTDIO -DMULTI_INSTANCE_CODE=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DHAVESTDIO -DMT=0 -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 ert_main.c' : D÷n³■ kodu '0x2' Stop. D:\workspace\matlab\waijung_18_11a_Matlab202x\test_2022b_stm32f4>echo The make command returned an error of 2 The make command returned an error of 2 D:\workspace\matlab\waijung_18_11a_Matlab202x\test_2022b_stm32f4>exit 1 ### Real-Time Workshop build procedure for model: 'test_2022b' aborted due to an error.

Can you help me solve the issue ?

[Sunphong Thanok]

Can u send the project code under this post ?

[xiaojie]

Thank u so much~

Answer 3

[Xuan Trung]

Matlab must be "Run as Administrator"

Answer 4

[Dhaval Mehta]

i am also facing a problem while installing a waijung blockset in matlab 2021a please help me to figure out this problem

[Walter Roberson]

You would invoke

install_waijung

instead of

install_waijung.m