Achromatic contrast, Spatial frequency and Reversing phase?
1 vue (au cours des 30 derniers jours)
Afficher commentaires plus anciens
How do I change achromatic contrast in percentage of a sinusoidal grating?
How do I change spatial frequency in cycles/degree?
How do I change grating orientation pseudo-randomly?
How do I reverse grating phase?
Original text: "These two experiments were based on a common dataset, which independently varied spatial frequency and contrast. Subjects were presented with gratings of differing achromatic contrast (1.43%, 5.25%, 15.95%, 50.14%, and 99. 62%) and spatial frequency (0.1, 0.27, 0.73, 2.08, and 5.79 cycles/degree) across different blocks, in a 5 × 5 design. Every 4 s, grating orientation changed pseudo-randomly. In addition, grating phase reversed every 1 s, and grating phase was systematically varied. Each run included 15 blocks of 16 s each, beginning and ending with an additional block (12 s) of uniform gray, of equivalent mean luminance. Each subject participated in 2 scan sessions, with 12 runs (1056 functional volumes) per session. Experiment 3 analyzed variations in contrast, combining spatial frequency. Experiment 4 did the reverse."
0 commentaires
Réponses (1)
Raunak Gupta
le 2 Déc 2020
Hi,
In my understanding this looks like modeling of a sensor which capture the image with different inherent properties. For that you may define the system using equations in MATLAB. If you are working with color images, then you can change the contrast using chromadapt.
Voir également
Catégories
En savoir plus sur Read, Write, and Modify Image dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!