Draw an arc between two points --> (x1,y1,z1) and (x2,y2,z2)
20 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Hi. I have several points on the sphere. I want to combine these points with arc. I can draw these points with lines but I can't draw arcs Please help
0 commentaires
Réponse acceptée
Youssef Khmou
le 23 Fév 2013
Modifié(e) : Youssef Khmou
le 23 Fév 2013
hi, you can try drawing a circle but restrict it into certain region,
I started a code, try to adjust/enhance it :
% Draw an arc between two points
p1=[-2 -2 -3];
p2=[10 15 20];
% Circle x²+y²+z²=Constant
%=> z=sqrt(Constant-x²-y²-);
Center=((p2+p1))./2;
xc=Center(1);
yc=Center(2);
zc=Center(3);
% Radius
R=norm((p2-p1))/2;
%Min=min(min(p1,p2));
%Max=max(max(p1,p2));
%x=linspace(Min,Max,20);
%y=linspace(Min,Max,20);
x=linspace(p1(1),p2(1),200);
y=linspace(p1(2),p2(2),200);
z=zc+sqrt((R^2)-((x-xc).^2)-((y-yc).^2));
figure, plot3(x,y,z), grid on, hold on
plot3(p1(1),p1(2),p1(3),'*','MarkerSize',10),
plot3(p2(1),p2(2),p2(3),'*','MarkerSize',10),
hold on, plot3(xc,yc,zc,'*','MarkerSize',10)
Plus de réponses (5)
Huseyin Eldem
le 24 Fév 2013
2 commentaires
Youssef Khmou
le 24 Fév 2013
Modifié(e) : Youssef Khmou
le 24 Fév 2013
hi Huseyin, then you didnt have to accept the answer because the problem is not solved yet , in the code above we used circle's equation, so to draw arc between 200 points, theirs coordinates must satisfy :
1<=i,j,k <=200 xi²+yi²+zi²=R²
IF the points do not satisfy the equation they dont BELONG to the arc :
ok lets try to draw an arc between 200 points : we generalize the above code :
clear, clc
p=round(10*randn(200,3));
% Circle x²+y²+z²=Constant
%=> z=sqrt(Constant-x²-y²-);
Center=((sum(p)))./2;
xc=Center(1);
yc=Center(2);
zc=Center(3);
% Radius
p2=max(p);
p1=min(p);
R=norm((p2-p1))/2;
%Min=min(min(p1,p2));
%Max=max(max(p1,p2));
%x=linspace(Min,Max,20);
%y=linspace(Min,Max,20);
x=linspace(p1(1),p2(1),200);
y=linspace(p1(2),p2(2),200);
z=zc+sqrt((R^2)-((x-xc).^2)-((y-yc).^2));
figure, plot3(x,y,z), grid on, hold on
plot3(p(:,1),p(:,2),p(:,3),'.')
As points do not satisfy the equation the line cant contain them all .
ChristianW
le 25 Fév 2013
Modifié(e) : ChristianW
le 25 Fév 2013
function test_sphere
n = 200;
THETA = rand(1,n)*2*pi;
PHI = rand(1,n)*2*pi;
R = 1.1*ones(1,n);
[x,y,z] = sph2cart(THETA,PHI,R);
acc = 10; % accuracy: ~ lines per arc
V = track_arc(x,y,z,acc);
plot3(x,y,z,'.r'); axis([-1 1 -1 1 -1 1]); axis square; hold on
plot3(V(1,:),V(2,:),V(3,:),'g')
sphere(31)
colormap([1 1 1]*0.1)
function V = track_arc(x,y,z,acc)
v1 = [x(1:end-1);y(1:end-1);z(1:end-1)]; % Vector from center to 1st point
v2 = [x(2:end);y(2:end);z(2:end)]; % Vector from center to 2nd point
r = sqrt(sum([x(1); y(1); z(1)].^2,1));
v3a = cross(cross(v1,v2),v1); % v3 lies in plane of v1 & v2 and is orthog. to v1
v3 = r*v3a./repmat(sqrt(sum(v3a.^2,1)),3,1); % Make v3 of length r
% Let t range through the inner angle between v1 and v2
tmax = atan2(sqrt(sum(cross(v1,v2).^2,1)),dot(v1,v2));
V = zeros(3,sum(round(tmax*acc))); % preallocate
k = 0; % index in v
for i = 1:length(tmax)
steps = round(tmax(i)*acc)+1; %Edited +1
k = (1:steps) + k(end);
t = linspace(0,tmax(i),steps);
V(:,k) = v1(:,i)*cos(t)+v3(:,i)*sin(t);
end
For the shortest great circle path, I modified code from Roger Stafford: http://www.mathworks.com/matlabcentral/newsreader/view_thread/277881
Huseyin Eldem
le 25 Fév 2013
1 commentaire
Youssef Khmou
le 25 Fév 2013
hi, they numbers need more processing to convert them into Mat format, anyway try this with numbers :
X=reshape(x,20,10);
Y=reshape(y,20,10);
Z=reshape(z,20,10);
figure, surf(X,Y,Z), shading interp
If they satisfy the equation, them they must give a partial Sphere
...
Voir également
Catégories
En savoir plus sur Surface and Mesh Plots dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!