- USB 3.2 generation 2 (10 gigabits per second)
- 10 gigabit Ethernet
- Thunderbolt 1 configured creatively, in theory, but Thunderbolt 2 or later in practice (dual bidirectional lanes each 20 gigabits)
Can a Matlab figure window display 4k video feed at 30FPS?
2 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
That's the question in title -for an RGB 8-bit video stream. Or do performance limilations preclude Matlab from achieving a smooth enough frame rate? Is there is known limit for data rate to display in Matlab figure window. E.g. using preview() in image processing toolbox.
Thanks.
0 commentaires
Réponses (1)
Walter Roberson
le 1 Déc 2020
Modifié(e) : Walter Roberson
le 1 Déc 2020
There might potentially be some system in which MATLAB could keep up with that, such as with a high performance graphic card and a gigE camera, but most systems would not be capable of it.
4k resolution is about 8.3 megapixel. Multiply by 3 color components of 8 bits and multiply by 30 fps, and the overall data transfer requirements are just under 6 gigabits per second, without taking into account overheads.
6 gigabits per second requires one of:
USB3.0 is not able to keep up.
That is just the hardware issues. Issues about generating ffast enough interrupts and turning it around and out to the render thread.
I would not say that it is outside of the capacity of all current systems, but not common.
2 commentaires
Walter Roberson
le 1 Déc 2020
Modifié(e) : Walter Roberson
le 1 Déc 2020
USB3 does not have enough bandwidth for that device at 30 fps unless the data is transferred in compressed form. USB3 is 5 gigabits per second raw transfer rate.
Voir également
Catégories
En savoir plus sur Image Preview and Device Configuration dans Help Center et File Exchange
Produits
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!