Power estimation using PWelch
7 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
mahesh subramanyam
le 14 Déc 2020
Réponse apportée : Star Strider
le 14 Déc 2020
I have the psd estimate using the Pwelch function in Matlab. I need to convert the PSD values from db/Hz to abosute power to dBm. The understanding that I have is from the PSD value at a particular frequency point do the following.
Power at frequency point=PSD value@ freq point+10*log10(frequency resolution)
Do we also have to add the correction factor for the windowing to get the absolute power?
0 commentaires
Réponse acceptée
Star Strider
le 14 Déc 2020
If you want the power spectrum as simple uints of power as a function of frequency, use the fft function. To convert amplitude to power, square the signal either before or after doing the fft on it. To convert the power values to decibels:
pwr = amplitude.^2;
dBpwr = 10*log10(pwr);
.
0 commentaires
Plus de réponses (0)
Voir également
Catégories
En savoir plus sur Parametric Spectral Estimation dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!