The two blocks contained in the two libraries with red circle respectively.
I want to link the two blocks together as they are the key components in my model. However, it failed as they located in differrent libraries.(one with the Blank square port another with the gray one).
Could anyone tell me how to link the two components together(like use a converter to transform the data) or if there's any substitute for the two blocks that in the same libraries?
Finally, I found a solution. First, measure the voltage of the Fuel Cell Stack and use the Simulink-PS converter to transform the electrical signal to a Simulink signal. Then connect the Simulink Signal to a controlled voltage scource in Simscape(not the one in specialized electrical system). In this way, the controlled voltage scource and PMSM ar ein the same library.
Impossible de terminer l’action en raison de modifications de la page. Rechargez la page pour voir sa mise à jour.
Translated by
Sélectionner un site web
Choisissez un site web pour accéder au contenu traduit dans votre langue (lorsqu'il est disponible) et voir les événements et les offres locales. D’après votre position, nous vous recommandons de sélectionner la région suivante : .
Vous pouvez également sélectionner un site web dans la liste suivante :
Comment optimiser les performances du site
Pour optimiser les performances du site, sélectionnez la région Chine (en chinois ou en anglais). Les sites de MathWorks pour les autres pays ne sont pas optimisés pour les visites provenant de votre région.