How to set suspension sag due to mass in simscape quarter car model ?
6 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
arvind j
le 19 Mar 2021
Réponse apportée : Yifeng Tang
le 30 Avr 2021
I have created a quarter car model in simscape. I want to create a suspension sag in the spring with respect to the given sprung mass of the system. I've tried setting an initial displacement to the spring but that acts as a constant offest throughout the simulation. I want the sagging to be relative to the sprung mass displacement llke in actual scenerio. Is there a way to do so ? Please let me know. Thanks.
0 commentaires
Réponse acceptée
Yifeng Tang
le 30 Avr 2021
Are you working in Simscape (1D mechanical) or Simscape Multibody?
In Multibody, the weight of the sprung mass will affect the spring sagging if the direction of gravity is in the correct direction.
In Simscape (translational mechanical domain most likely), there is no gravity by default. You can add gravity as an force source, whose magnitude is m*g. Just need to figure out the directions and port orientations.
0 commentaires
Plus de réponses (0)
Voir également
Catégories
En savoir plus sur Multibody Modeling dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!