writePWMDutyCycle question about arguments
2 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
regarding the last parameter of writePWMDutyCycle(a,'D5',0.33);. Would the last paramater '0.33' mean a duty cycle that would be 33% of the max pwm value 255? for example an input of 0.5 would mean a 50% duty cycle or 127.5 on the pwm scale [0-255]. Further, would an input of '1' mean 100% duty cycle aka 255 on the pwm scale?
a = arduino();
writePWMDutyCycle(a,'D5',0.33);
Thank you
0 commentaires
Réponses (1)
Abhinav Aravindan
le 20 Fév 2024
The duty cycle of a periodic signal is the proportion of the signal 'ON' time to its 'OFF' time within one period.
On an Arduino board that utilizes 8-bit PWM, a “dutyCycle” value of 0.5 corresponds to a value of 127 (since it must be an integer) on the PWM scale. This means that the signal will remain 'ON' for 50% of the time in one cycle. Similarly, setting the “dutyCycle” to 1 will result in an 'always ON' signal, or 255 on the PWM scale.
Please note that the “dutyCycle” parameter only changes the duration of the signal 'ON' time and not the PWM signal voltage level.
For more details, please refer to the link provided below.
0 commentaires
Voir également
Catégories
En savoir plus sur Arduino Hardware dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!