Confuction with cutoff frequency
3 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Juan Chehin
le 5 Août 2021
Commenté : Star Strider
le 6 Août 2021
Hello, I have this code that is from a chebyshev filter and I need to know if what is marked in red on the graph corresponds to the cutoff frequencies
Fs = 4400;
Fn = Fs/2;
n = 3; Rp = 0.5;
Wn = [250 2000]/Fn;
[b a]=cheby1(n,Rp,Wn,'bandpass')
[h,w]=freqz(b,a)
plot(w,abs(h))
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/703872/image.png)
0 commentaires
Réponse acceptée
Star Strider
le 5 Août 2021
The first red line (at 0.357) corresponds to the low cutoff frequency. The upper cutoff frequency should be at 2.856, so the second red line (at 2.000) does not correspond to it (or to anything else of significance).
.
10 commentaires
Star Strider
le 6 Août 2021
‘The common practice of defining the cutoff frequency at −3 dB is usually not applied to Chebyshev filters; instead the cutoff is taken as the point at which the gain falls to the value of the ripple for the final time.’
So with a passband ripple defined as 0.5 dB, the cutoff frequencies correspond to that amplitude (dotted black line).
Fs = 4400;
Fn = Fs/2;
n = 3; Rp = 0.5;
Wn = [250 2000]/Fn;
[b a]=cheby1(n,Rp,Wn,'bandpass');
[h,w]=freqz(b,a,2^16);
plot(w,mag2db(abs(h)))
hold on
plot(([1;1]*Wn*pi), ([1;1]*ylim).', '-r')
plot(xlim, -0.5*[1 1], ":k")
hold off
grid
ylim([-10, 0])
legend('Passband','Cutof Frequencies', 'Location','S')
.
Plus de réponses (0)
Voir également
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!