im trying to do multiple trigger events in simulink stateflow. what i need is to create 2 clk (clk1 and clk2) with different frequency witch controls light as you can see on stateflow chart. but when i simulate my model it triggers when both clk are at the rising edge and holds light "ON", instead of switching light "OFF" on rising clk1 and "ON" on rising clk2
From my understanding, you are facing an issue in switching between states inside the chart, at the rising edges of the respective clock signals. You can achieve the same using 'Edge Detector' blocks. This block will generate a value one, when it detects a change in value in its input. The detection criteria can be made 'rising', 'falling' or 'either' . You can input 'clk1' and 'clk2' to two different edge detector blocks and the output from the blocks can be used to switch between the states 'on' and 'off' in the stateflow chart.
Impossible de terminer l’action en raison de modifications de la page. Rechargez la page pour voir sa mise à jour.
Translated by
Sélectionner un site web
Choisissez un site web pour accéder au contenu traduit dans votre langue (lorsqu'il est disponible) et voir les événements et les offres locales. D’après votre position, nous vous recommandons de sélectionner la région suivante : .
Vous pouvez également sélectionner un site web dans la liste suivante :
Comment optimiser les performances du site
Pour optimiser les performances du site, sélectionnez la région Chine (en chinois ou en anglais). Les sites de MathWorks pour les autres pays ne sont pas optimisés pour les visites provenant de votre région.