Problem 8053. Stress-Strain Properties - 6

Created by goc3

Solve Later

{"parts":[{"partUri":"/matlab/document.xml","contentType":"application/vnd.mathworks.matlab.code.document+xml","content":"<?xml version=\"1.0\" encoding=\"UTF-8\"?><w:document xmlns:w=\"http://schemas.openxmlformats.org/wordprocessingml/2006/main\"><w:body><w:p><w:pPr><w:pStyle w:val=\"text\"/><w:jc w:val=\"left\"/></w:pPr><w:r><w:t>The total energy absorbed by a material up to failure in a tensile test is termed the absorbed strain energy. With respect to the figure below, it is the total area of the elastic and plastic regions and can be calculated by integrating the stress-strain curve. As a first approximation, many stress-strain responses can be approximated by:</w:t></w:r></w:p><w:p><w:pPr><w:pStyle w:val=\"text\"/><w:jc w:val=\"center\"/></w:pPr><w:customXml w:element=\"image\"><w:customXmlPr><w:attr w:name=\"height\" w:val=\"23\"/><w:attr w:name=\"width\" w:val=\"73\"/><w:attr w:name=\"verticalAlign\" w:val=\"baseline\"/><w:attr w:name=\"altText\" w:val=\"\"/><w:attr w:name=\"relationshipId\" w:val=\"rId1\"/></w:customXmlPr></w:customXml></w:p><w:p><w:pPr><w:pStyle w:val=\"text\"/><w:jc w:val=\"left\"/></w:pPr><w:r><w:t>where K is a strength coefficient, eps_p is the plastic strain, and n is the hardening exponent. Stress as a function of strain can be calculated by creating a strain vector from zero to the ultimate strain and integrating the stress values in that vector.</w:t></w:r></w:p><w:p><w:pPr><w:pStyle w:val=\"text\"/><w:jc w:val=\"center\"/></w:pPr><w:customXml w:element=\"image\"><w:customXmlPr><w:attr w:name=\"height\" w:val=\"397\"/><w:attr w:name=\"width\" w:val=\"600\"/><w:attr w:name=\"verticalAlign\" w:val=\"baseline\"/><w:attr w:name=\"altText\" w:val=\"\"/><w:attr w:name=\"relationshipId\" w:val=\"rId2\"/></w:customXmlPr></w:customXml></w:p><w:p><w:pPr><w:pStyle w:val=\"text\"/><w:jc w:val=\"center\"/></w:pPr><w:r><w:t>(from simsolid.com)</w:t></w:r></w:p><w:p><w:pPr><w:pStyle w:val=\"text\"/><w:jc w:val=\"left\"/></w:pPr><w:r><w:t>Write a function to return the absorbed strain energy for a material provided K and n. If the material does not strain harden, then K and n will be set equal to zero. In these cases, the absorbed strain energy is equal to the resilience (triangular area up to yield point) and any absorbed plastic energy, if applicable, which can be approximated by a rectangle from the yield point to the failure point with those stresses being equal. If the ultimate strain equals the yield strain, that rectangular area is zero.</w:t></w:r></w:p><w:p><w:pPr><w:pStyle w:val=\"text\"/><w:jc w:val=\"left\"/></w:pPr><w:r><w:t>Previous problem: 5 -</w:t></w:r><w:r><w:t> </w:t></w:r><w:hyperlink w:docLocation=\"\"><w:r><w:t>stiffness-to-weight ratio</w:t></w:r></w:hyperlink><w:r><w:t>. Next problem: 7 -</w:t></w:r><w:r><w:t> </w:t></w:r><w:hyperlink w:docLocation=\"\"><w:r><w:t>toughness</w:t></w:r></w:hyperlink><w:r><w:t>.</w:t></w:r></w:p></w:body></w:document>","relationship":[{"relationshipType":"http://schemas.mathworks.com/matlab/code/2013/relationships/image","target":"/media/image1.png","relationshipId":"rId1"},{"relationshipType":"http://schemas.mathworks.com/matlab/code/2013/relationships/image","target":"/media/image1.jpg","relationshipId":"rId2"}]},{"partUri":"/media/image1.png","contentType":"image/png","content":"data:image/png;base64,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","relationship":null},{"partUri":"/media/image1.jpg","contentType":"image/jpg","content":"https://www.simsolid.com/wp-content/uploads/2017/10/stress-strain-curve.jpg","relationship":null}],"relationships":[{"relationshipType":"http://schemas.mathworks.com/matlab/code/2013/relationships/document","target":"/matlab/document.xml","relationshipId":"rId1"}]}

<div style = "text-align: start; line-height: 20.4333px; min-height: 0px; white-space: normal; color: rgb(0, 0, 0); font-family: Menlo, Monaco, Consolas, monospace; font-style: normal; font-size: 14px; font-weight: 400; text-decoration: rgb(0, 0, 0); white-space: normal; "><div style="block-size: 758px; display: block; min-width: 0px; padding-block-start: 0px; padding-top: 0px; perspective-origin: 407px 379px; transform-origin: 407px 379px; vertical-align: baseline; "><div style="block-size: 63px; font-family: Helvetica, Arial, sans-serif; line-height: 21px; margin-block-end: 9px; margin-block-start: 2px; margin-bottom: 9px; margin-inline-end: 10px; margin-inline-start: 4px; margin-left: 4px; margin-right: 10px; margin-top: 2px; perspective-origin: 384px 31.5px; text-align: left; transform-origin: 384px 31.5px; white-space: pre-wrap; margin-left: 4px; margin-top: 2px; margin-bottom: 9px; margin-right: 10px; "><span style="block-size: auto; display: inline; margin-block-end: 0px; margin-block-start: 0px; margin-bottom: 0px; margin-inline-end: 0px; margin-inline-start: 0px; margin-left: 0px; margin-right: 0px; margin-top: 0px; perspective-origin: 379px 8px; transform-origin: 379px 8px; unicode-bidi: normal; "><span style="">The total energy absorbed by a material up to failure in a tensile test is termed the absorbed strain energy. With respect to the figure below, it is the total area of the elastic and plastic regions and can be calculated by integrating the stress-strain curve. As a first approximation, many stress-strain responses can be approximated by:</span></span></div><div style="block-size: 28.5px; font-family: Helvetica, Arial, sans-serif; line-height: 21px; margin-block-end: 9px; margin-block-start: 2px; margin-bottom: 9px; margin-inline-end: 10px; margin-inline-start: 4px; margin-left: 4px; margin-right: 10px; margin-top: 2px; perspective-origin: 384px 14.25px; text-align: center; transform-origin: 384px 14.25px; white-space: pre-wrap; margin-left: 4px; margin-top: 2px; margin-bottom: 9px; margin-right: 10px; "><img class="imageNode" style="vertical-align: baseline" src="data:image/png;base64,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" data-image-state="image-loaded"></div><div style="block-size: 63px; font-family: Helvetica, Arial, sans-serif; line-height: 21px; margin-block-end: 9px; margin-block-start: 2px; margin-bottom: 9px; margin-inline-end: 10px; margin-inline-start: 4px; margin-left: 4px; margin-right: 10px; margin-top: 2px; perspective-origin: 384px 31.5px; text-align: left; transform-origin: 384px 31.5px; white-space: pre-wrap; margin-left: 4px; margin-top: 2px; margin-bottom: 9px; margin-right: 10px; "><span style="block-size: auto; display: inline; margin-block-end: 0px; margin-block-start: 0px; margin-bottom: 0px; margin-inline-end: 0px; margin-inline-start: 0px; margin-left: 0px; margin-right: 0px; margin-top: 0px; perspective-origin: 367px 8px; transform-origin: 367px 8px; unicode-bidi: normal; "><span style="">where K is a strength coefficient, eps_p is the plastic strain, and n is the hardening exponent. Stress as a function of strain can be calculated by creating a strain vector from zero to the ultimate strain and integrating the stress values in that vector.</span></span></div><div style="block-size: 402.5px; font-family: Helvetica, Arial, sans-serif; line-height: 21px; margin-block-end: 9px; margin-block-start: 2px; margin-bottom: 9px; margin-inline-end: 10px; margin-inline-start: 4px; margin-left: 4px; margin-right: 10px; margin-top: 2px; perspective-origin: 384px 201.25px; text-align: center; transform-origin: 384px 201.25px; white-space: pre-wrap; margin-left: 4px; margin-top: 2px; margin-bottom: 9px; margin-right: 10px; "><img class="imageNode" style="vertical-align: baseline;width: 600px;height: 397px" src="https://www.simsolid.com/wp-content/uploads/2017/10/stress-strain-curve.jpg" data-image-state="image-loaded" width="600" height="397"></div><div style="block-size: 21px; font-family: Helvetica, Arial, sans-serif; line-height: 21px; margin-block-end: 9px; margin-block-start: 2px; margin-bottom: 9px; margin-inline-end: 10px; margin-inline-start: 4px; margin-left: 4px; margin-right: 10px; margin-top: 2px; perspective-origin: 384px 10.5px; text-align: center; transform-origin: 384px 10.5px; white-space: pre-wrap; margin-left: 4px; margin-top: 2px; margin-bottom: 9px; margin-right: 10px; "><span style="block-size: auto; display: inline; margin-block-end: 0px; margin-block-start: 0px; margin-bottom: 0px; margin-inline-end: 0px; margin-inline-start: 0px; margin-left: 0px; margin-right: 0px; margin-top: 0px; perspective-origin: 61px 8px; transform-origin: 61px 8px; unicode-bidi: normal; "><span style="">(from simsolid.com)</span></span></div><div style="block-size: 105px; font-family: Helvetica, Arial, sans-serif; line-height: 21px; margin-block-end: 9px; margin-block-start: 2px; margin-bottom: 9px; margin-inline-end: 10px; margin-inline-start: 4px; margin-left: 4px; margin-right: 10px; margin-top: 2px; perspective-origin: 384px 52.5px; text-align: left; transform-origin: 384px 52.5px; white-space: pre-wrap; margin-left: 4px; margin-top: 2px; margin-bottom: 9px; margin-right: 10px; "><span style="block-size: auto; display: inline; margin-block-end: 0px; margin-block-start: 0px; margin-bottom: 0px; margin-inline-end: 0px; margin-inline-start: 0px; margin-left: 0px; margin-right: 0px; margin-top: 0px; perspective-origin: 363px 8px; transform-origin: 363px 8px; unicode-bidi: normal; "><span style="">Write a function to return the absorbed strain energy for a material provided K and n. If the material does not strain harden, then K and n will be set equal to zero. In these cases, the absorbed strain energy is equal to the resilience (triangular area up to yield point) and any absorbed plastic energy, if applicable, which can be approximated by a rectangle from the yield point to the failure point with those stresses being equal. If the ultimate strain equals the yield strain, that rectangular area is zero.</span></span></div><div style="block-size: 21px; font-family: Helvetica, Arial, sans-serif; line-height: 21px; margin-block-end: 9px; margin-block-start: 2px; margin-bottom: 9px; margin-inline-end: 10px; margin-inline-start: 4px; margin-left: 4px; margin-right: 10px; margin-top: 2px; perspective-origin: 384px 10.5px; text-align: left; transform-origin: 384px 10.5px; white-space: pre-wrap; margin-left: 4px; margin-top: 2px; margin-bottom: 9px; margin-right: 10px; "><span style="block-size: auto; display: inline; margin-block-end: 0px; margin-block-start: 0px; margin-bottom: 0px; margin-inline-end: 0px; margin-inline-start: 0px; margin-left: 0px; margin-right: 0px; margin-top: 0px; perspective-origin: 67.5px 8px; transform-origin: 67.5px 8px; unicode-bidi: normal; "><span style="">Previous problem: 5 -</span></span><span style="block-size: auto; display: inline; margin-block-end: 0px; margin-block-start: 0px; margin-bottom: 0px; margin-inline-end: 0px; margin-inline-start: 0px; margin-left: 0px; margin-right: 0px; margin-top: 0px; perspective-origin: 2px 8px; transform-origin: 2px 8px; unicode-bidi: normal; "><span style=""> </span></span><a target='_blank' href = "/#null"><span style=""><span style="">stiffness-to-weight ratio</span></span></a><span style="block-size: auto; display: inline; margin-block-end: 0px; margin-block-start: 0px; margin-bottom: 0px; margin-inline-end: 0px; margin-inline-start: 0px; margin-left: 0px; margin-right: 0px; margin-top: 0px; perspective-origin: 57.5px 8px; transform-origin: 57.5px 8px; unicode-bidi: normal; "><span style="">. Next problem: 7 -</span></span><span style="block-size: auto; display: inline; margin-block-end: 0px; margin-block-start: 0px; margin-bottom: 0px; margin-inline-end: 0px; margin-inline-start: 0px; margin-left: 0px; margin-right: 0px; margin-top: 0px; perspective-origin: 2px 8px; transform-origin: 2px 8px; unicode-bidi: normal; "><span style=""> </span></span><a target='_blank' href = "/#null"><span style=""><span style="">toughness</span></span></a><span style="block-size: auto; display: inline; margin-block-end: 0px; margin-block-start: 0px; margin-bottom: 0px; margin-inline-end: 0px; margin-inline-start: 0px; margin-left: 0px; margin-right: 0px; margin-top: 0px; perspective-origin: 2px 8px; transform-origin: 2px 8px; unicode-bidi: normal; "><span style="">.</span></span></div></div></div>

The total energy absorbed by a material up to failure in a tensile test is termed the absorbed strain energy. With respect to the figure below, it is the total area of the elastic and plastic regions and can be calculated by integrating the stress-strain curve. As a first approximation, many stress-strain responses can be approximated by:

where K is a strength coefficient, eps_p is the plastic strain, and n is the hardening exponent. Stress as a function of strain can be calculated by creating a strain vector from zero to the ultimate strain and integrating the stress values in that vector.

(from simsolid.com)
Write a function to return the absorbed strain energy for a material provided K and n. If the material does not strain harden, then K and n will be set equal to zero. In these cases, the absorbed strain energy is equal to the resilience (triangular area up to yield point) and any absorbed plastic energy, if applicable, which can be approximated by a rectangle from the yield point to the failure point with those stresses being equal. If the ultimate strain equals the yield strain, that rectangular area is zero.
Previous problem: 5 - stiffness-to-weight ratio. Next problem: 7 - toughness.

Solve

Solution Stats

265 Solutions
53 Solvers

Last Solution submitted on Jan 23, 2023

Last 200 Solutions

Problem Comments

5 Comments

5 Comments

Show 2 older comments

Jean-Marie Sainthillier on 5 Sep 2015

Hello Grant, links to formulas are broken for several problems in this series.

Jean-Marie Sainthillier on 5 Sep 2015

it's Ok now, thank you.

ChrisR on 12 May 2021

For a while, I thought that the stress-strain curve was linear up to the yield point and then given by the power law (suitably shifted). Now I realize that for strain hardening materials, the power law applies for strains between zero and the ultimate strain.

Christian Schröder on 30 Dec 2022 at 11:09

There's a somewhat confusing typo in your solution template - the fourth parameter passed is actually S_y, not S_u.

Dyuman Joshi on 31 Dec 2022 at 7:02

The typo has been fixed.

Problem Recent Solvers53

Problem Tags

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Problem 8053. Stress-Strain Properties - 6

Solution Stats

Last 200 Solutions

Problem Comments

Problem Recent Solvers53

Suggested Problems

More from this Author139

Problem Tags

Community Treasure Hunt

Problem 8053. Stress-Strain Properties - 6

Solution Stats

Last 200 Solutions

Problem Comments

Problem Recent Solvers53

Suggested Problems

More from this Author139

Problem Tags

Community Treasure Hunt

Players