Reactive power compensation by using STATCOM
Version 1.0.0 (46,4 ko) par
Ashenafi Tesfaye
This model shows the reactive power compensation using STATCOM for two bus system. The controller of STATCOM is based on PI controller.
Reactive power compensation is very important study in power systems analysis and operation. Here the STATCOM is designed by using simple two bus system to generate the reactive power for three phase load. the dq-theory based parameters transformation is applied for generating the pwm pulses for three phase inverter. The PI-controller is applied to controll both d-axis and q-axis current and also for controlling the DC-bus voltage.
From scope 6 and 7, we could observe that the active power of the load is supplied from the source and reactive power is from the STATCOM. Here, only PI-controller is applied with a tuned kp and ki gain values. With help of advanced controllers, the response could be improved.
Citation pour cette source
Ashenafi Tesfaye (2024). Reactive power compensation by using STATCOM (https://www.mathworks.com/matlabcentral/fileexchange/135697-reactive-power-compensation-by-using-statcom), MATLAB Central File Exchange. Récupéré le .
Compatibilité avec les versions de MATLAB
Créé avec
R2018b
Compatible avec toutes les versions
Plateformes compatibles
Windows macOS LinuxTags
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!Découvrir Live Editor
Créez des scripts avec du code, des résultats et du texte formaté dans un même document exécutable.
Version | Publié le | Notes de version | |
---|---|---|---|
1.0.0 |