version 4.1.0.0 by
Ben Barrowes

Converts basic fortran90 source code to MATLAB source code.

Most recent version at:

http://engineering.dartmouth.edu/~d30574x/consulting/consultingIndex.html

CONTENTS:

-1. SUPPORT f2matlab AND CONSULTING

0. DISCLAIMER

1. OBJECTIVE

2. MOTIVATION

3. BUG REPORTS and WISH LIST

4. F2MATLAB CAPABILITIES

5. F2MATLAB LIMITATIONS

6. HOW TO USE F2MATLAB

7. EXAMPLES

8. REVISION HISTORY

-1.SUPPORT f2matlab.

I now also do conversion/translation/validation/optimization consulting.

Please refer to my webpage:

http://engineering.dartmouth.edu/~d30574x/consulting/consultingIndex.html

Even though f2matlab is free (under GPL) for the using, I would like

to ask that those who find it useful, wish to support the project,

and are able to make a contribution to please do so commesurate with

use (especially corporations). *** Important - Please donate using

your PayPal account and not a credit card so as to avoid fees at

PayPal. Thank you! PayPal email ID: barrowes@alum.mit.edu

0. DISCLAIMER: Matlab is a trademark of the Mathworks company and is

owned by them. The author makes no guarantee express or implied of

any kind as to the applicability, usefulness, efficacy,

bug-freeness, or the accuracy of the ensuing results from using

f2matlab.

The author bears no responsibility for any unwanted effect

resulting from the use of this program. The author is not

affiliated with the Mathworks. The source code is given in full in

the hopes that it will prove useful. Devlopment is done through

sourceforge at f2matlab.sourceforge.net.

1. OBJECTIVE: f2matlab.m is a small translator which aims to

convert Fortran90 files to Matlab m-files.

2. MOTIVATION:

1) Matlab is becoming ubiquitous in the engineering and scientific

communities for its ease of use coupled with its powerful

libraries. Yet the fact remains that a large number of stable and

dependable programs exist in the fortran77/90 corpus.

2) Many times, often amidst the porting of fortran programs to

Matlab, an automated converter of fortran90 code to Matlab code would

be useful.

3) Having written matlab2fmex.m, a matlab to fortran90 mex file

converter, the writing of f2matlab, which performs the reverse

conversion, was substantially simplified.

3. BUG REPORTS and WISH LIST:

For all bug reports, a wish list for f2matlab, and suggestions,

see http://engineering.dartmouth.edu/~d30574x/consulting/consultingIndex.html

or email barrowes@alum.mit.edu

4. F2MATLAB CAPABILITIES: f2matlab is aimed at converting

Fortran90 code to Matlab m-files. Accordingly, only basic data types

and constructions are recommended. f2matlab can handle:

all numeric types (handled by Matlab interpreter)

most string functions

comparisons, branches, loops, etc.

basic read/write/print statements (if it's not too fancy...)

modules

5. F2MATLAB LIMITATIONS: f2matlab can not handle some features of

fortran90 yet. These include:

can't handle complex read and write statements

derived-typed variables

equivalence

...

6. HOW TO USE F2MATLAB: f2matlab expects a single fortran90 fortran file to

convert. If you have fortran77 code, use some free converter

(e.g. to_f90 by Alan Miller) before running f2matlab. Then simply

call f2matlab by using the full filename:

f2matlab('filename.f90');

The output will be filename.m in the same directory.

A few flags are available that effect conversion:

% want_kb=0; 1 ==> if keyboard mode is desired after some conversion steps

% want_ze=0; 1 ==> direct f2matlab to zero all array variables.

% want_fi=0; 1 ==> direct f2matlab to try to put fix()'s around declared integers.

Multiple subroutines and functions can and should be in the same fortran90 file.

Ben Barrowes (2020). benbarrowes/f2matlab (https://github.com/benbarrowes/f2matlab), GitHub. Retrieved .

Created with
R14

Compatible with any release

**Inspired:**
Generalised Exponential Integral, GaussHermite

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!Create scripts with code, output, and formatted text in a single executable document.

Ben BarrowesShubho,

This error usually means you have not included "use"d modules in your code file. This free version of f2matlab doesn't deal with modules very well anyway. If you can't get it to work for you, please send me all your code in a zip file: barrowes@alum.mit.edu

Shubho MohajanHi Ben, First of all thank you very much the code. I was trying to convert some fortran 90 code to matlab .m file using your code. But I am facing this following errors. Can you please help me?

Index in position 2 exceeds array bounds.

Error in f2matlab (line 1621)

[dummy,temp2,usedMods]=intersect({modUsedMods{temp,2}{:}},{modLocalVar{temp3,1}});

Ben BarrowesMaryam, f2matlab cannot find your file. Make sure you are in the correct directory with your file in it, and f2matlab is on your path.

maryam mohammadpourHi Ben, thanks for your code.

When I am using the code, I get this error.

f2matlab('femprb.f90');

-----------------------------------------------------------

| f2matlab -- Ben Barrowes, Barrowes Consulting |

-----------------------------------------------------------

Error using fscanf

Invalid file identifier. Use fopen to generate a valid file identifier.

Error in f2matlab (line 212)

fid=fopen(filename); filestr=fscanf(fid,'%c'); fclose(fid);

Would you please tell me what the problem is. I tried this with the simple code of mine and also your sample codes.

Ben BarrowesAndrea, please email me your code and I can take a look. barrowes@alum.mit.edu

Andrea BaglieriHi Ben, your code give me this error:

Expected one output from a curly brace or dot indexing expression, but there were 0 results.

Error in f2matlab (line 2558)

for i=1:length(funstrwords{fundecline}(funargs))

Error in fortranmatlab (line 1)

f2matlab('fortran.f90');

how can I resolve it? thank u

Ben BarrowesMartijn, there maybe something wrong with your file. Email me your code and I can take a look.

Martijn van SluisDear Ben,

No matter what file I select I always get the error: Index exceeds array bounds (Line 3877): if ~any(strcmp(funstrwords{i}{j},noChangeWords). Is this a known issue? Looking forward to your reply.

Ben BarrowesSema, f2matlab seems to be having trouble finding faverage.f90. Make sure you are in the directory with faverage.f90 when you invoke f2matlab. You can PM me if you still have issues.

Sema BuyukcelebiHi, thank you very much for this code to convert f90 files to matlab. Unfortunately I got message "Unable to resolve the name faverage.f90. All the files are in the same directory. What could be the reason?. If you help me I would be grateful

Ben BarrowesNiti, Odd that it would complete but generate no warnings or output. Please make sure your code is up to f90 standards. Then PM me the code if it still doesn't work for you. bb

Niti AgrawalHi Ben, thank you for this code to convert fortran file to matlab.

I tried running my file using f2matlab('test.f90') and it starts running but completes without generating a .m file.

It works with the example files provided with the folder, however I'm not getting any output for my .f90 file.

Ben BarrowesStuart, It looks like there is an implied do loop that is giving f2matlab difficulty in your code. Please make sure your code is up to f90 standards after following the README file. If that doesn't fix the problem, PM me your code, and I can take a look. bb

Stuart CraigAll of the examples run just fine but when I try to run it on a piece of code of my own I get the following errors. Any advice you can provide would be appreciated.

Index exceeds matrix dimensions.

Error in convertRW_impLoops (line 19)

if strcmp(groupsIn{ii}(1),'''')

Error in convertRW (line 12)

temp7=convertRW_impLoops(temp6);

Error in convertWrite (line 208)

convertRW

Error in wordconverter_f (line 233)

convertWrite

Error in f2matlab (line 3909)

[funstr,fortranfunwords,tempflag,temp2,temp4,needThings]=wordconverter_f(i,j,funstr,funstrnumbers,funstrnumbers_b,funstrnumbers_e,funstrwords,funstrwords_b,funstrwords_e,fs_good,funwords,fortranfunwords,formats,localVar,modLocalVar,MLapp,varp,want_row,var_words,this_fun_name,TFops,allTypeDefs,funwordsML,statementFunction,fun_name,dumvar,want_gl,fundecline,funargs,needThings,usedMods);

Error in f2matlab (line 1706)

[temp2,temp3,temp4,temp5]=f2matlab(filename,fun_name{i},i,segmentStarts,fun_name);

Changyong HeYour source code is very very very very difficult to modify!!!!!!!!

matlab is so easy to use. However, you initialise the variables with a lot of if and check modules. That's funny.

Changyong HeBen BarrowesParth, f95 has a few more features than f90, but they are mostly the same.

It looks like f2matlab couldn't find you file. Go through the README with the examples first.

Parth prajapatiHey, thanks for the converter ben, when i try to run f2matlab it says

((Error using fscanf

Invalid file identifier. Use fopen to generate a valid file identifier.

Error in f2matlab (line 212)

fid=fopen(filename);

filestr=fscanf(fid,'%c'); fclose(fid);))

and another thing is how do i convert f95 to f90 ?? both are same ?

Qun HANBen BarrowesKlearchos, make sure the directory you unzipped f2matlab in is on the matlab path.

Email me at barrowes@alum.mit.edu for more help than I can give here.

Thanks,

bb

kiran gkKlearchos SamarasHello Ben

I keep trying to use f2matlab as you note in part 6. I have a *.f90 file (written with Crimson Editor) and when I use the command >>f2matlab('*.f90'); no output '*.m' file is returned. No errors occur and your function works though. I have everything in the same folder/path. I also tried to use it on your example '*.f90' files, but I still don't get an output file.

BoboHello Ben

I really would love to try your f2matlab. I have a very important f.90 code I would like to convert to Matlab. I have tried your f2matlab function which always seems to work for your examples but never mind. Can you please update your function to help fix a problem such as this

Error:

Index exceeds matrix dimensions.

Error in f2matlab (line 1621)

[dummy,temp2,usedMods]=intersect({modUsedMods{temp,2}{:}},{modLocalVar{temp3,1}});

Thanks

Antonio GutierrezHi Ben Barrowes,

First thing to say thanks for your convert f2matlab.

My problem is the following:

I have several script in fortran90. These include some subroutines within each script. I apply your code to convert and it apparently works well. However, when I try running some of these codes starting to have problem. As each script in fortran90 contain several subroutines, How matlab takes it into account?

There is part of my fortran90 code as:

use readandwrite !this module contains subroutines for reading, formatting and writing data

use FindError

Implicit None

character :: peaklistname*100 !name of the file with all the observed modes in it.

character :: outputname*100 !name of the output file

character :: bestname*125 !name of the output file with the best correlations

character :: gridname*125 !name of the output file with the complete grid search results

character :: tab = ACHAR(9) !tab

integer, parameter :: TS = 3 !the highest allowed term in the expansion

integer, parameter :: MAX_STEPS = 100000 !The maximum possible steps in one direction for the non-grid search........

.............. 60 format (a).....

that I don't understand the conversion to matlab:

format_60=['%c'];

readandwrite;

finderror;

%name of the file with all the observed modes in it.

if isempty(peaklistname), peaklistname=repmat(' ',1,100); end;

%name of the output file

if isempty(outputname), outputname=repmat(' ',1,100); end;

%name of the output file with the best correlations

if isempty(bestname), bestname=repmat(' ',1,125); end;

%name of the output file with the complete grid search results

if isempty(gridname), gridname=repmat(' ',1,125); end;

%tab

if isempty(tab), tab = char(9); end;

%the highest allowed term in the expansion

if isempty(ts), ts = 3; end;

%The maximum possible steps in one direction for the non-grid search

if isempty(max_steps), max_steps = 100000; end;

.......

On the other hand, when I try running it is broken and give the message:

...Cannot find an exact (case-sensitive) match for 'strassign'......

Thank you very much....

HassanI tried to convert some Fortran subroutines to MATLAB, I am getting the following error:

??? Undefined function or variable 'assignSwitches'.

Error in ==> f2matlab at 104

assignSwitches

Thank you for any suggestion.

Ben BarrowesAra,

The first error looks like it cannot find the file you specified.

The error regarding modUsedMods probably indicates f2matlab could not find a module your fortran program "use"d.

Not sure about the "index exceeds..." error.

Please send me a private email with your code and I can take a look.

bb

Electric SheepTried 3 different files and getting errors as follows:

1.

Error using fscanf

Invalid file identifier. Use fopen to generate a valid file

identifier.

Error in f2matlab (line 212)

fid=fopen(filename); filestr=fscanf(fid,'%c'); fclose(fid);

2 & 3.

Index exceeds matrix dimensions.

Error in f2matlab (line 1621)

[dummy,temp2,usedMods]=intersect({modUsedMods{temp,2}{:}},{modLocalVar{temp3,1}});

dhaba indiaBen BarrowesKathryn,

Try tof90 by Alan Miller for a f77 to f90 converter. But I am not sure why you should have this recursion error. Please email me your code at barrowes@alum.mit.edu so I can take a look.

bb

Kathryn PurdonI am getting a recursion error.

Error message: Maximum recursion limit of 500 reached. Use set(0,'RecursionLimit',N) to change the limit.Be aware that exceeding your available stack space can crash MATLAB and/or your computer.

Could this be a result of using fortran77 code?

Do you have a suggestion of a free converter for f77 to f90?

Ben BarrowesMaria, Please follow the README. You need to put the directory containing f2matlab on your matlab path.

Maria Jose LegazI have tried to convert a fortran 95 program.

The error found is:

Undefined function or variable 'f2matlab'

Ben BarrowesChirag, I am not sure why you would have to change the recursion limit. Please send me your code so I can take a look. bb

chirag koratI figure out how to change recursion limit but I can increase this limit to 1000, and it gives error. so in fortran code which thing I should change?

chirag koratcan anyone help me out how to change recursion limit during converting fortran to matlab ?

Ben BarrowesMichel Hajj (or anyone having trouble with f2matlab), please email me with your fortran file, so I can take a look:

barrowes@alum.mit.edu

Kenneth Lamurymichel hajjIndex exceeds matrix dimensions.

Error in f2matlab (line 4539)

if (strcmp(temp5,'character') || ~isempty(temp6{16})) && length(temp6{5})>0

any help, please?

Flávio cardosoWhen when I try run f2matlab to convert fortran in matlab. The screen show me a error below:

??? Undefined function or variable 'getfunwordsonly'.

Error in ==> f2matlab at 103 funwords=getfunwordsonly;)

Anyone can help me? Please

Harikrishna ReddyGood one

Andrea LibriHassan Mohamedcan anybody please explain step by step the process of conversion, because the readme file doesn't exist.

ALIiimplicit none

REAL U1,U2,r,dt,dx,nu,tf,t,c,X,a,b,d,c2,d2,k,cl,lambda,alpha

integer n,i,j,scheme

ALLOCATABLE U1(:),U2(:),X(:),a(:),b(:),c(:),d(:),c2(:),d2(:)

CHARACTER*80 DON

CHARACTER*80 param

WRITE(*,*) 'Fichier de donnees ? '

READ(*,'(A)') param

OPEN(4,FILE=param)

READ(4,*) n

READ(4,*) dt

READ(4,*) tf

READ(4,*) nu

READ(4,*) scheme

READ(4,*) cl

READ(4,*) lambda

READ(4,*) alpha

CLOSE(4)

IF(scheme.EQ.1) THEN

WRITE(*,*) 'Explicit scheme'

ELSE

WRITE(*,*) 'Implicit scheme'

ENDIF

IF(cl.EQ.0) THEN

WRITE(*,*) 'cl rigide '

ELSE

WRITE(*,*) 'cl libre'

ENDIF

WRITE(*,*) 'n =',n

WRITE(*,*) 'dt =',dt

WRITE(*,*) 'tf =',tf

WRITE(*,*) 'nu =',nu

WRITE(*,*) 'lambda =',lambda

WRITE(*,*) 'alpha =',alpha

dx=1./float(n)

r=nu*dt/(dx*dx)

k=dt/(2*dx)

ALLOCATE (U1(n+1),U2(n+1),X(n+1),a(n+1),b(n+1),c(n+1),

& d(n+1),c2(n+1),d2(n+1))

DO i=1,n+1

X(i)=(i-1)*dx

a(i)=0

b(i)=0

c(i)=0

d(i)=0

END DO

c initialisation

DO i=1,n+1

U1(i)=SIN(2*3.1415927*(i-1)/n)

END DO

t=0

DO WHILE (t.LT.tf)

t=t+dt

c conditions limites

U1(1)=0

U1(n+1)=0

U2(1)=0

U2(n+1)=0

c boucle explicite

IF(scheme.EQ.1) THEN

DO i=2,n

U2(i)=r*U1(i+1)+(1-2*r)*U1(i)+r*U1(i-1)

& -k*U1(i)*(U1(i+1)-U1(i-1))

END DO

DO i=1,n

U1(i)=U2(i)

END DO

c boucle implicite

ELSE

DO j=2,n+1

a(j)=-0.25*dt*U1(j-1)/dx-0.5*r

END DO

DO j=1,n+1

b(j)=1+r

END DO

DO j=1,n

c(j)=0.25*dt*U1(j+1)/dx-0.5*r

END DO

d(1)=(1-r)*U1(1)+0.5*r*U1(2)

d(n+1)=0.5*r*U1(n)+(1-r)*U1(n+1)

DO j=2,n

d(j)=0.5*r*U1(j-1)+(1-r)*U1(j)+0.5*r*U1(j+1)

& +dt*(lambda*U1(j)+alpha*U1(j)*U1(j)*U1(j))

END DO

c algorithme de Thomas

c2(1)=c(1)/b(1)

d2(1)=d(1)/b(1)

DO i=2,n+1

c2(i)=c(i)/(b(i)-a(i)*c2(i-1))

d2(i)=(d(i)-a(i)*d2(i-1))/(b(i)-a(i)*c2(i-1))

END DO

U1(n+1)=d2(n+1)

DO i=1,n

U1(n+1-i)=d2(n+1-i)-U1(n-i+2)*c2(n+1-i)

END DO

ENDIF

END DO

WRITE(*,*) 'Fichier de resultat ? '

READ(*,'(A)') DON

OPEN(5,FILE=DON)

DO i=1,n+1

WRITE(5,*) X(i),U1(i)

END DO

CLOSE (5)

END

alaa ahmedcan any one to convert this code into .m file matlab

thanks

1 DIMENSION A {17,17},B{17,17}

2 DO 6 I=2,17

3 DO 5 J=1,17

4 A{I,J}=0.

5 CONTINUE

6 CONTINUE

7 DO 9 J=2,16

8 A{I,J}=100.

9 CONTINUE

10 A{L,L}=50.

11 A{1,17}=50

12 DO 16 I=2,16

13 DO 15 J=2,16

14 A{I,J}={A{I,J-6}+A{I-L+J}+A{I,J+L}+A{I+L,J}}/4.

15 CONTINUE

16 CONTINUE

17 DO 23 I=2,16

18 DO 22 J=2,16

19 C={A{I,J-L}+A{I-L,J}+A{I,J+L}+A{I,L.J}}/4

20 B{I,J}=A{I,J}-C

21 IF{{ABS{B{I,J}}-.00001}.GT.O.} GO TO 12

22 CONTINUE

23 CONTINUE

24 WRITE{6,25}{{A{I,J},J=1,17},I=1,17}

25 FORMAT {1H0,17F7.2}

26 STOP

27 END

Arwan KhoiruddinDiklaHi

I have a problem installing this program on Matlab R2011b

Can you provide an explantion of using those files?

JinbruceRan the code and immediately received the following error:

??? Index exceeds matrix dimensions.

Error in ==> f2matlab at 1055

funstr={funstr{segmentStarts(whichsub):segmentStarts(whichsub+1)-1}}';

Don't know enough about the code to solve this problem.

AlexanderKospachI´m trying to convert as well a frotran code to matlab code. I always get the errormessage

---------------------------------------

??? Too many outputs requested. Most likely cause is missing [] around

left hand side that has a comma separated list expansion.

Error in ==> findendSub_f at 80

sublist{slLen+1,7}=sublist{temp6,1};

Error in ==> f2matlab at 899

[sublist,funstr,funstrnumbers,funstrnumbers_b,funstrnumbers_e,funstrwords,funstrwords_b,funstrwords_e,fs_good]=findendSub_f([],sublist,s,funstr,funstrnumbers,funstrnumbers_b,funstrnumbers_e,funstrwo

Error in ==> test at 2

f2matlab('MarqStepEX_P.for');

---------------------------------------

and i have no idea want it means. thx for any help

Md mahbub MishuI am using this f2matlab file but when I call the function to convert my fortran90 code to .m file, it says "bad cell reference"

I am giving my fortran code below:

C

C RANKINE SOURCE WAVES TRANSFERRED TO FORM KELVIN ANGLE

C (UNIT STRENGTH, UNIT VOLUME)

DIMENSION FSPANL(20,40), FSP2(30,50),

+ A(40,20),B(40,20),H(40,20),

+ AK(40,20),BK(40,20),HK(40,20)

DATA IR,DEPTH/20,20.0/

C

C

C

DO 100 I=1,20

DO 100 J=1,40

100 FSPANL(I,J)=0.0

C

C

C

DELTAR=20.0/FLOAT(IR)

DO 200 I1=1,IR

R=DELTAR*FLOAT(I1)

RK=DELTAR*FLOAT(I1)+0.5

THETA=2.0*3.141592/FLOAT(I1*4)

ITHETA=I1*4

DO 300 I2=1,ITHETA

ANGLE=THETA*FLOAT(I2-1)

A(I2,I1)=R*COS(ANGLE)

AK(I2,I1)=RK*COS(ANGLE)

B(I2,I1)=R*SIN(ANGLE)

BK(I2,I1)=RK*SIN(ANGLE)

300 CONTINUE

C

DO 350 I2=1,ITHETA

R3D=SQRT((A(I2,I1)-A(1,I1))**2+(B(I2,I1)-B(1,I1))**2+DEPTH**2)

R3DK=SQRT((AK(I2,I1)-AK(1,I1))**2

+ +(BK(I2,I1)-BK(1,I1))**2+DEPTH**2)

H(I2,I1)=R3D**2/(2.0*9.81*(R3D**3))

HK(I2,I1)=-R3DK**2/(2.0*9.81*(R3DK**3))

350 CONTINUE

C

DO 360 I2=1,ITHETA

A(I2,I1)=A(I2,I1)+3.0*R

AK(I2,I1)=AK(I2,I1)+3.0*R

B(I2,I1)=B(I2,I1)+10.0

BK(I2,I1)=BK(I2,I1)+10.0

360 CONTINUE

C

C

C

DO 1000 I2=1,ITHETA

C

I=1

J=1

ICOUNT=1

COL=1.0

IF (A(I2,I1).GT.40.0) GO TO 910

400 IF (A(I2,I1).GT.COL) GO TO 500

J=ICOUNT

GO TO 600

500 COL=COL+1.0

ICOUNT=ICOUNT+1

GO TO 400

600 CONTINUE

C

ICOUNT=1

ROW=1.0

IF (B(I2,I1).GT.20.0) GO TO 910

IF (B(I2,I1).LT.0.0) GO TO 910

700 IF (B(I2,I1).GT.ROW) GO TO 800

I=ICOUNT

GO TO 900

800 ROW=ROW+1.0

ICOUNT=ICOUNT+1

GO TO 700

C

910 H(I2,I1)=0.0

900 FSPANL(I,J)=FSPANL(I,J)+H(I2,I1)

C

I=1

J=1

ICOUNT=1

COL=1.0

IF (AK(I2,I1).GT.40.0) GO TO 915

405 IF (AK(I2,I1).GT.COL) GO TO 505

J=ICOUNT

GO TO 605

505 COL=COL+1.0

ICOUNT=ICOUNT+1

GO TO 405

605 CONTINUE

C

ICOUNT=1

ROW=1.0

IF (BK(I2,I1).GT.20.0) GO TO 915

IF (BK(I2,I1).LT.0.0) GO TO 915

705 IF (BK(I2,I1).GT.ROW) GO TO 805

I=ICOUNT

GO TO 905

805 ROW=ROW+1.0

ICOUNT=ICOUNT+1

GO TO 705

C

915 HK(I2,I1)=0.0

905 FSPANL(I,J)=FSPANL(I,J)+HK(I2,I1)

C

1000 CONTINUE

200 CONTINUE

C

C

C

DO 3000 I=1,30

DO 3000 J=1,50

3000 FSP2(I,J)=0.0

C

DO 4000 I=1,20

DO 4000 J=1,40

IP5=I+5

JP10=J+10

4000 FSP2(IP5,JP10)=FSPANL(I,J)

C

C

C

DO 1100 I=1,30

DO 1100 J=1,50

X=0.5+1.0*(J-1)

Y=0.5+1.0*(I-1)

Z=FSP2(I,J)

WRITE(15,5000) X,Y,Z

5000 FORMAT(1X,3F10.6)

1100 CONTINUE

C

C

STOP

END

if anybody can help me to convert this into .m file, I will appreciate his or her effort.

Thanks

Mishu

AlanHi,

How do I install f2matlab on Vista? I cannot get the "INSTALL" file to execute, there is no 'Run' command when I right-click on it.

Thanks,

Erkan Tiryakiit would be great if I could fix the error points with a guide..

pinkhow to use it, can be given one example of step by step process of using f2matlab

Andre Guy TranquilleHastiepenI know nothing about Fortran, and had to convert some code into Matlab. The conversions that f2matlab made helped me immensely to give me a starting point. Many thanks!

Martin RichardVery useful package indeed. Thank you.

Qun HANIt's great to know this great tool is still imporved.

anonymous anonymousHello

I have tried to convert the where statement applied to a 2D array to matlab and it seems f2matlab does not translate well.

Best Regards

Eduardo

program ed_example

integer B(10, 2)

B(1:10, 1) = 0

B(1:10, 2) = 1

where (B(:,:)>0)

B(:,:) = B(:,:) + 9

endwhere

end program

Translating:

f2matlab('ed_example.f')

ans =

b([1:10], 1) = 0;

b([1:10], 2) = 1;

fmask=(b(:,:)>0);

b(fmask,:) = b(fmask,:) + 9;

endwhere;

Running:

>> b(fmask,:) = b(fmask,:) + 9

??? Index exceeds matrix dimensions.

Fat HidalgoI tried to run the code but I keep getting the error:

??? Input argument "filename" is undefined.

Error in ==> f2matlab at 101

if exist(filename,'file')==2

I think this is because Matlab does not like when functions are defined in the script. I should define the function outside of the script in a separate .m file, but when I try to do so, I just get more errors. It's hard for to to see what I need to cut from the original program to define the function separately. Anybody with comments on this please email me.

thangjam singhvery good

rakesh reddy govindapurgood work

aws ataallahThomas ClarkThe actual utility is really useful... When it works.

However, (I think due to the ambiguity between row and column vectors in Fortran) I found a lot of problems in translation, where it just ground to a halt.

In a sense that's to be expected; but there is almost no error handling to cope with that kind of situation- If I could just find out which line of the source code was causing the trouble, I'd be able to comment that section out in the F90 file and manually translate those particular lines. As the f2matlab code is largely uncommented it's havoc to try and trace which lines of code cause the translation problem.

Don't get me wrong; this can be extremely useful code - and clearly a lot of effort has gone into it's development. However, it needs to be a bit more transparent to help us get over the patches where the ambiguity of Fortran lets the translation down.

Anthony KendallThough it's not perfect (because of the ambiguity of the GOTO, READ, and WRITE functions in FORTRAN, they don't convert correctly), this converted about 1000 lines of code for me that I was then able to debug and convert to MATLAB format in about 8 hours. Not bad, considering the code was written by someone else!

Malin PremaratneThis is a very useful function

peter spelluccishahab ghomi