Under certain conditions, an exothermic reaction in a continuous stirred-tank reactor (CSTR) with heat exchange can exhibit multiple steady-state solutions. Some solutions are stable, others are unstable, and some can exhibit sustained oscillations or limit cycles. The steady-state operating conditions for the reactor depend on how the reactor is started up (initial conditions). The first phase plane plot shows reactant concentration versus reactor temperature as a function of time as the reactor approaches a steady state (or a limit cycle) for five initial concentrations. The second phase plane plots conversion versus temperature for one set of initial conditions, and you can vary both the initial temperature and the initial concentration Co. Temperature and conversion are also shown as a function of time in separate plots for these initial conditions. The steady-state solutions change as you vary the residence time t, and limit cycle behavior is observed for residence times greater than about 30 minutes. The last plot (energy versus temperature) shows heat generated and heat removed as a function of temperature, and the intersections of these two curves correspond to steady-state solutions to the mass and energy balances for the CSTR.
Michaël Grimsberg (2022). Non-adiabatic CSTR (https://www.mathworks.com/matlabcentral/fileexchange/88291-non-adiabatic-cstr), MATLAB Central File Exchange. Retrieved .
MATLAB Release Compatibility
Platform CompatibilityWindows macOS Linux
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!Start Hunting!