offsetaxis.m: Offset an x- or y-axis from the plotted axis area
This repository includes the code for the
offsetaxis.m Matlab function, along with all dependent functions required to run it.
offsetaxis function allows one to move the visible axis away from the plotted axis area. This is often done to allow for multiple axes associated with a single graph, or to simply create a less cluttered appearance along the edges of plotted data. It achieves this appearance by creating a second, mostly-hidden-except-for-the-axis-line axis that is linked to the original axis.
- Getting started
- Example 1: Axis offset positions
- Example 2: More flexible multi-axis plots
This function should be compatible with all versions of Matlab.
Downloading and installation
Matlab Search Path
The following folders need to be added to your Matlab Search path (via
offsetaxis(ax) adds an offset y-axis to the axis or axes indicated by the handle(s)
ax, displaced 0.1 axis-width units from the original axis.
offsetaxis(ax, ..., 'y', yoffset) adds an offset y-axis to the axis indicated by the handle
ax, displaced by a custom distance
yoffset that is defined as a fraction of the axis width. Default is 0.1 if no x-offset is specified, and 0 otherwise.
offsetaxis(ax, ..., 'x', xoffset) adds an offset x-axis to the axis indicated by the handle
ax, displaced by a custom distance
xoffset that is defined as a fraction of the axis height. Default is 0.
offsetaxis(ax, ..., 'yloc', yloc) indicates where the offset y-axis should be placed ('l' = left, 'r' = right, 'lr' = both). Default is 'l'.
offsetaxis(ax, ..., 'xloc', yloc) indicates where the offset x-axis should be placed ('t' = top, 'b' = bottom, 'tb' = both). Default is 'b'.
hy = offsetaxis(...) returns the handles to the newly-created axis objects used to display offset y-axes.
hy will be the same dimensions as
ax, and is only returned if a y-offset is specified by input.
hx = offsetaxis(...) returns the handles to the newly-created axis objects used to display offset x-axes.
hx will be the same dimensions as
ax, and is only returned if a x-offset is specified by input.
Example 1: Axis offset positions
The following example demonstrates the default location of an offset y-axis.
x = 0:0.01:20; y1 = 200*exp(-0.05*x).*sin(x); figure; ax = axes; hold on; plot(x, y1); offsetaxis(ax); % Default, y-offset = 0.1 and yloc = 'l'
Offset axes can also be added in any direction.
figure; ax = axes; plot(x, y1); offsetaxis(ax, 'y', 0.05, 'x', 0.05, 'yloc', 'lr', 'xloc', 'tb');
Example 2: More flexible multi-axis plots
Matlab includes a few helper functions to allow plotting of data on different scales on the same axes. These functions include
plotyy in older versions, and
yyaxis in newer versions. There are also numerous File Exchange entries designed to extend these functions to more data types, more axes, and to the x-axis (plotyyy, plots, etc.). These functions rely on the same underlying concept as
offsetaxis (i.e. creating extra axes). However, the lower-level control offered by offset axis to control all aspects of this type of plot allows you to manually build more complex multi-axis plots.
In this example, we demonstrate some of the concepts needed to create this sort of plot. We'll use the same data as the
x = 0:0.01:20; y1 = 200*exp(-0.05*x).*sin(x); y2 = 0.8*exp(-0.5*x).*sin(10*x); figure % new figure plotyy(x,y1,x,y2);
The first step to creating our new figure is to create two axes on top of each other. We then add one line to each plot. Note that we need to manually remove the color from the top axis to make sure we can see through to the bottom one (and set the hold state, since a call to plot or other high-level plotting functions will reset this if the hold state is off).
figure; % Create two axes on top of each other ax1 = axes; ax2 = axes('position', ax1.Position, 'color', 'none'); hold(ax2, 'on'); % Plot data to their respective axes: ln1 = plot(ax1, x, y1); ln2 = plot(ax2, x, y2, 'r');
Next, we add the offset axis. It's also common to want to match the color of the axes to the plotted data, though this may vary for your particular needs.
hy = offsetaxis(ax2, 'y', 0.1); set(hy, 'YColor', ln2.Color); set(ax1, 'YColor', ln1.Color);
As you can see, this method involves more work than a simple call to
yyaxis or any of the all-in-one File Exchange functions, but in exchange, you can gain more flexibility over the number of and location of additional axes. You can add as many axes as needed in either the x- or y-directions!
figure; ax = axes('position', [0.2 0.2 0.6 0.6]); offsetaxis(ax, 'y', 0.01); offsetaxis(ax, 'y', 0.1); offsetaxis(ax, 'y', 0.2); offsetaxis(ax, 'y', 0.1, 'yloc', 'r'); offsetaxis(ax, 'x', 0.1); offsetaxis(ax, 'x', 0.2); offsetaxis(ax, 'x', 0.1, 'xloc', 't'); set(ax, 'box', 'on');
Published with MATLAB R2019a
Kelly Kearney (2023). offsetaxis (https://github.com/kakearney/offsetaxis-pkg), GitHub. Retrieved .
MATLAB Release Compatibility
Platform CompatibilityWindows macOS Linux
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!Start Hunting!
Versions that use the GitHub default branch cannot be downloaded