Maadhav Akula
Last seen: Today
MathWorks
166 total contributions since 2019I am an Application Support Engineer in Engineering Development Group at Mathworks.
My areas of interest are Matlab and Simulink.
DISCLAIMER: Any advice or opinions here are my own, and in no way reflect that of Mathworks.
Maadhav Akula's Badges
Contribute at least one answer each month for 6 consecutive months
Awarded to Maadhav Akula on 02 Sep 2020
20 of your answers have been accepted
Awarded to Maadhav Akula on 31 May 2020
Answer 10 questions that were unanswered for more than 30 days
Awarded to Maadhav Akula on 08 May 2020
Provide your first answer ever to someone else's question
Awarded to Maadhav Akula on 17 Jul 2019
Answered
How to refactor dted(foldername) function calls using the new readgeoraster() function?
Hi Thomas, Utilizing dteds() function as you suggested is one of the workaround, maybe in your case, utilize dted() function fo...
How to refactor dted(foldername) function calls using the new readgeoraster() function?
Hi Thomas, Utilizing dteds() function as you suggested is one of the workaround, maybe in your case, utilize dted() function fo...
26 jours ago | 0
Answered
Function and xls doesn't work?
Hi, I presume you have generated this function by choosing the Generate Function under Import Selection, and then saving the fu...
Function and xls doesn't work?
Hi, I presume you have generated this function by choosing the Generate Function under Import Selection, and then saving the fu...
29 jours ago | 0
Answered
光学式文字認識（OCR）を使用したテキストの認識を行う際に日本語を認識させたい
Please refer the following documentation page: https://www.mathworks.com/help/vision/ug/ocr-language-data-files.html
光学式文字認識（OCR）を使用したテキストの認識を行う際に日本語を認識させたい
Please refer the following documentation page: https://www.mathworks.com/help/vision/ug/ocr-language-data-files.html
29 jours ago | 0
| accepted
Answered
Get the system time in simulink real time
I think the following answer might help: https://www.mathworks.com/matlabcentral/answers/685248-how-do-i-get-run-time-or-system...
Get the system time in simulink real time
I think the following answer might help: https://www.mathworks.com/matlabcentral/answers/685248-how-do-i-get-run-time-or-system...
environ un mois ago | 1
| accepted
Answered
how to deselect a brushed data programatically? Without clicking on the figure
You can set the Brushed Data to 0 at the respective indices to deselect the brushed data. Please check the example below to bett...
how to deselect a brushed data programatically? Without clicking on the figure
You can set the Brushed Data to 0 at the respective indices to deselect the brushed data. Please check the example below to bett...
environ un mois ago | 0
Answered
How to extrapolate the gaps between multiple 2D scans in a 3D scan
As per my understanding of your question, you want to create a 3D image with your existing 2D scans, for that please refer the s...
How to extrapolate the gaps between multiple 2D scans in a 3D scan
As per my understanding of your question, you want to create a 3D image with your existing 2D scans, for that please refer the s...
environ un mois ago | 0
| accepted
Answered
Compiling .tlc file
I don't think that is possible, the following answer might shed more light on this: https://www.mathworks.com/matlabcentral/ans...
Compiling .tlc file
I don't think that is possible, the following answer might shed more light on this: https://www.mathworks.com/matlabcentral/ans...
environ un mois ago | 0
Answered
Error while installing MATLAB
Follow the procedure on this page, to install MATLAB without Internet connection. If you are still facing issues, please reach ...
Error while installing MATLAB
Follow the procedure on this page, to install MATLAB without Internet connection. If you are still facing issues, please reach ...
environ un mois ago | 0
Answered
Pie charts in subplot with different size
Hi Alberto, As @Adam Danz has rightly pointed out tiledlayout function will help you out and also as you mentioned you have oth...
Pie charts in subplot with different size
Hi Alberto, As @Adam Danz has rightly pointed out tiledlayout function will help you out and also as you mentioned you have oth...
environ un mois ago | 1
Answered
I cannot inspect the workspace on MATLAB for linux
Looks like a JAVA issue, reach out to Mathworks Support: www.mathworks.com/support/contact_us/
I cannot inspect the workspace on MATLAB for linux
Looks like a JAVA issue, reach out to Mathworks Support: www.mathworks.com/support/contact_us/
environ un mois ago | 0
Answered
How does one set the line style for the plotted traces on the new "timescope" object in a script?
Hi Richard, Currently we do not support this feature, I have brought this issue to the notice of our developers, they might con...
How does one set the line style for the plotted traces on the new "timescope" object in a script?
Hi Richard, Currently we do not support this feature, I have brought this issue to the notice of our developers, they might con...
3 mois ago | 0
Answered
Unable to resolve the name comm.AWGNChannel
Hi, Try the following command: which -all comm.AWGNChannel This should return the location of the file of AWGNChannel.m Also...
Unable to resolve the name comm.AWGNChannel
Hi, Try the following command: which -all comm.AWGNChannel This should return the location of the file of AWGNChannel.m Also...
3 mois ago | 0
Answered
New installation 2020b legend error
Might be an installation issue, please reach out to Mathworks Support: www.mathworks.com/support/contact_us/
New installation 2020b legend error
Might be an installation issue, please reach out to Mathworks Support: www.mathworks.com/support/contact_us/
3 mois ago | 0
Answered
R2020b installation doesn't start
Please refer the following post: https://www.mathworks.com/matlabcentral/answers/100823-why-am-i-getting-the-error-cannot-creat...
R2020b installation doesn't start
Please refer the following post: https://www.mathworks.com/matlabcentral/answers/100823-why-am-i-getting-the-error-cannot-creat...
3 mois ago | 0
Answered
Problem Reading EXCEL file . Can someone help me with this problem, recently it was fine reading the file but all of sudden it turn to this since i wanted to test again my program.
Hi Ahmed, Looks like you have modified the importdata.m file, so you have to pcode the file again, if not please try reinstalli...
Problem Reading EXCEL file . Can someone help me with this problem, recently it was fine reading the file but all of sudden it turn to this since i wanted to test again my program.
Hi Ahmed, Looks like you have modified the importdata.m file, so you have to pcode the file again, if not please try reinstalli...
3 mois ago | 0
Answered
Simulink error after a reinstall
I would suggest you to reach out to Mathworks Support: www.mathworks.com/support/contact_us/
Simulink error after a reinstall
I would suggest you to reach out to Mathworks Support: www.mathworks.com/support/contact_us/
3 mois ago | 0
Answered
MATLAB license for Jenkins automation server?
Hi Danijel, Yes, a Full License is required by the Continuous Integration(CI) server, however it can be shared with the organiz...
MATLAB license for Jenkins automation server?
Hi Danijel, Yes, a Full License is required by the Continuous Integration(CI) server, however it can be shared with the organiz...
3 mois ago | 0
Answered
How do I share between my newly installed individual license, and the concurrent license available with more toolboxes (2020b)?
Hi William, Yes it is possible, additionally you can refer this post as well: https://www.mathworks.com/matlabcentral/answers/...
How do I share between my newly installed individual license, and the concurrent license available with more toolboxes (2020b)?
Hi William, Yes it is possible, additionally you can refer this post as well: https://www.mathworks.com/matlabcentral/answers/...
4 mois ago | 0
| accepted
Answered
detections from a radar
Hi Priyanka, Please refer this page for more info on the co-ordinates reported in the Measurement property. Hope this helps!
detections from a radar
Hi Priyanka, Please refer this page for more info on the co-ordinates reported in the Measurement property. Hope this helps!
4 mois ago | 0
Answered
Help in starting the code of phased antenna arrays
Hi, Initially you have to create an Antenna element using the objects from this page. For your case of omnidirectional you can ...
Help in starting the code of phased antenna arrays
Hi, Initially you have to create an Antenna element using the objects from this page. For your case of omnidirectional you can ...
5 mois ago | 0
| accepted
Answered
xlsread Error: Object returned error code: 0x800A03EC
Hi Anna, "xlsread" communicates with an Excel COM automation server. Communicating with COM is not 100% reliable. The error mes...
xlsread Error: Object returned error code: 0x800A03EC
Hi Anna, "xlsread" communicates with an Excel COM automation server. Communicating with COM is not 100% reliable. The error mes...
5 mois ago | 0
| accepted
Answered
Simulink get transfer function
Hi Ranjan, I think by Linear Analysis you are referring to the following: https://www.mathworks.com/help/slcontrol/ug/lineariz...
Simulink get transfer function
Hi Ranjan, I think by Linear Analysis you are referring to the following: https://www.mathworks.com/help/slcontrol/ug/lineariz...
5 mois ago | 0
| accepted
Answered
Hi, Can anyone help with the P&O algorithm for solar pv using the boost converter? I have little experience with matlab and I have been trying for months with little success. Please, help anyone?
I am not sure, but hope this helps: https://www.mathworks.com/matlabcentral/fileexchange/39641-perturb-and-observe-p-o-algorith...
Hi, Can anyone help with the P&O algorithm for solar pv using the boost converter? I have little experience with matlab and I have been trying for months with little success. Please, help anyone?
I am not sure, but hope this helps: https://www.mathworks.com/matlabcentral/fileexchange/39641-perturb-and-observe-p-o-algorith...
5 mois ago | 0
Answered
how to interpret scalogram coefficients
I think you can refer the following answer if you want to capture the data of a figure: https://www.mathworks.com/matlabcentral...
how to interpret scalogram coefficients
I think you can refer the following answer if you want to capture the data of a figure: https://www.mathworks.com/matlabcentral...
5 mois ago | 0
Answered
Erasemode error: How do i correct it?
Erasemode property has been removed starting from R2014b, you can refer the following answer for how to replace that property: ...
Erasemode error: How do i correct it?
Erasemode property has been removed starting from R2014b, you can refer the following answer for how to replace that property: ...
5 mois ago | 0
Answered
dicomanon remove all dates
Hi, Currently you cannot remove those attributes directly using dicomanon, but you can utilize the 'update' Name-Value pair in ...
dicomanon remove all dates
Hi, Currently you cannot remove those attributes directly using dicomanon, but you can utilize the 'update' Name-Value pair in ...
5 mois ago | 0
Answered
Matlab R2018b freezes on splash screen in Ubuntu 18.04
I believe this to be a Java issue as -nojvm flag works fine, maybe try changing the JVM, refer the following: https://www.mathw...
Matlab R2018b freezes on splash screen in Ubuntu 18.04
I believe this to be a Java issue as -nojvm flag works fine, maybe try changing the JVM, refer the following: https://www.mathw...
5 mois ago | 0
Answered
How to Transfer Trace Data File from Agilent ESA to PC Using Matlab Instrument Control Toolbox
Hi Jacob, I assume you are having a char array and now want to convert it into a csv file, then I think you can try the followi...
How to Transfer Trace Data File from Agilent ESA to PC Using Matlab Instrument Control Toolbox
Hi Jacob, I assume you are having a char array and now want to convert it into a csv file, then I think you can try the followi...
5 mois ago | 1
Answered
Calculating Sharpe ratio with examples provided
Hi, Upon using the data and the first code you have provided I got the sharpeRatio to be 0.7873 Now coming to your 2nd snippet...
Calculating Sharpe ratio with examples provided
Hi, Upon using the data and the first code you have provided I got the sharpeRatio to be 0.7873 Now coming to your 2nd snippet...
6 mois ago | 0
| accepted
Answered
ADSR envelope: Digital synthesizer
Hi, I believe you want to play note_do when user clicks on key A on their computer keyboard, in that case you can utilize the c...
ADSR envelope: Digital synthesizer
Hi, I believe you want to play note_do when user clicks on key A on their computer keyboard, in that case you can utilize the c...
6 mois ago | 0
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
Select web siteYou can also select a web site from the following list:
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)