Answered

How to calculate distance between center of white pixels in an image?

You can find the center (centroid) of each white region using REGIONPROPS, and then just calculate the distance between the cent...

How to calculate distance between center of white pixels in an image?

You can find the center (centroid) of each white region using REGIONPROPS, and then just calculate the distance between the cent...

plus d'un an ago | 1

Answered

Calculating Angle Between Two Vectors / Three Points

The units on the axes are very different. Displacement is around +/- 3 while shear is around +/- 80, so the calculated angles f...

Calculating Angle Between Two Vectors / Three Points

The units on the axes are very different. Displacement is around +/- 3 while shear is around +/- 80, so the calculated angles f...

plus d'un an ago | 1

| accepted

Answered

solve and plot a system of nonlinear 2nd order differential equations

If you just need a plot and not a closed-form solution, then I'd recommend just using ODE45 without worrying about symbolic stuf...

solve and plot a system of nonlinear 2nd order differential equations

If you just need a plot and not a closed-form solution, then I'd recommend just using ODE45 without worrying about symbolic stuf...

plus d'un an ago | 1

| accepted

Answered

Figure作成時にNaNとInfだけ黒に指定する方法

NaNやInfを透明にして、背景を黒にすることは一つにアイディアです。 例えば： rng(0); X = peaks(20); % 適当なデータを作成 X(randperm(numel(X),3)) = nan; % 適当にNaNを入れる X(r...

Figure作成時にNaNとInfだけ黒に指定する方法

NaNやInfを透明にして、背景を黒にすることは一つにアイディアです。 例えば： rng(0); X = peaks(20); % 適当なデータを作成 X(randperm(numel(X),3)) = nan; % 適当にNaNを入れる X(r...

plus d'un an ago | 4

| accepted

Answered

Up-sampling in convolutional neural network

I think you may be able to do it using a transposedConv2dLayer. This works, (though I'm not entirely confident that this is the ...

Up-sampling in convolutional neural network

I think you may be able to do it using a transposedConv2dLayer. This works, (though I'm not entirely confident that this is the ...

presque 2 ans ago | 0

Answered

how to overlay(superimpose) contour plot(coloured) over a gray scale image

A grayscale image with a colored contour plot superimposed: % Make some sample grayscale image I = abs(sin((1:500)'/100)*sin((...

how to overlay(superimpose) contour plot(coloured) over a gray scale image

A grayscale image with a colored contour plot superimposed: % Make some sample grayscale image I = abs(sin((1:500)'/100)*sin((...

environ 2 ans ago | 1

| accepted

Answered

Simultaneously numerically integrate coupled ODE's in MATLAB

You can get dx2/dt by multiplying dx2/dx1 * dx1/dt. As a simple example say (I'll use x and y instead of x1 and x2 cause it's...

Simultaneously numerically integrate coupled ODE's in MATLAB

You can get dx2/dt by multiplying dx2/dx1 * dx1/dt. As a simple example say (I'll use x and y instead of x1 and x2 cause it's...

presque 3 ans ago | 0

Answered

I need to overlay a color map over a gray scale image with with the colorbar on the side.

Something like this maybe? figure; ax1 = axes; imagesc(x); colormap(ax1,'gray'); ax2 = axes; imagesc(ax2,T...

I need to overlay a color map over a gray scale image with with the colorbar on the side.

Something like this maybe? figure; ax1 = axes; imagesc(x); colormap(ax1,'gray'); ax2 = axes; imagesc(ax2,T...

presque 3 ans ago | 3

| accepted

Answered

How can I plot the graph of a gyroid which is composed of 3 variables in the form of F(x,y,z)=t

fimplicit3(@(x,y,z) sin(x).*cos(y)+sin(y).*cos(z)+sin(z).*cos(x)) Note that for element-wise multiplication I made sure to ...

How can I plot the graph of a gyroid which is composed of 3 variables in the form of F(x,y,z)=t

fimplicit3(@(x,y,z) sin(x).*cos(y)+sin(y).*cos(z)+sin(z).*cos(x)) Note that for element-wise multiplication I made sure to ...

environ 3 ans ago | 1

| accepted

Answered

数値積分を行う上でIntegralの扱い方

割り算のところで / を使っていますが、それに点をつけて ./ にする必要があります。 ntf = @(x) abs(((1i*2*pi*x).^3)./((1i*2*pi*x).^3+k1*(1i*2*pi*x).^2+k2*(1i*2*p...

数値積分を行う上でIntegralの扱い方

割り算のところで / を使っていますが、それに点をつけて ./ にする必要があります。 ntf = @(x) abs(((1i*2*pi*x).^3)./((1i*2*pi*x).^3+k1*(1i*2*pi*x).^2+k2*(1i*2*p...

environ 3 ans ago | 1

| accepted

Answered

Simulink上で計算した値をMatlabの.ｍファイルの計算部分に組み込む方法はありますか？

まず出力したい信号にOutportをつなげて、 <https://www.mathworks.com/help/simulink/slref/outport.html> "sim" コマンドでモデルを実行し、出力の値を取得したらどうでしょうか。...

Simulink上で計算した値をMatlabの.ｍファイルの計算部分に組み込む方法はありますか？

まず出力したい信号にOutportをつなげて、 <https://www.mathworks.com/help/simulink/slref/outport.html> "sim" コマンドでモデルを実行し、出力の値を取得したらどうでしょうか。...

environ 3 ans ago | 4

Answered

Vectorization, check if points coordinate is exist in an image or no

signVector = ones(size(coordinates,1),1); inds = sub2ind(size(N),coordinates(:,1),coordinates(:,2)); % Convert to linear in...

Vectorization, check if points coordinate is exist in an image or no

signVector = ones(size(coordinates,1),1); inds = sub2ind(size(N),coordinates(:,1),coordinates(:,2)); % Convert to linear in...

environ 3 ans ago | 0

| accepted

Answered

How to find volume under fitted data?

If you have a function y = f(r), which it sounds like you do since you have a polynomial, then you can use integral. y = ...

How to find volume under fitted data?

If you have a function y = f(r), which it sounds like you do since you have a polynomial, then you can use integral. y = ...

environ 3 ans ago | 0

| accepted

Answered

InterX issues. Showing intersection when there is none.

The intersections are actually there. The issue is just in plotting. Straight lines between two points aren't straight on a s...

InterX issues. Showing intersection when there is none.

The intersections are actually there. The issue is just in plotting. Straight lines between two points aren't straight on a s...

environ 3 ans ago | 1

| accepted

Answered

How do I solve a second order non linear differential equation using matlab.

syms z(t) t A B zp = diff(z,t); zpp = diff(z,t,2); eqn = ( zpp + A*zp^2 == B ); cond = [z(0)==0, zp(0)==0...

How do I solve a second order non linear differential equation using matlab.

syms z(t) t A B zp = diff(z,t); zpp = diff(z,t,2); eqn = ( zpp + A*zp^2 == B ); cond = [z(0)==0, zp(0)==0...

environ 3 ans ago | 1

Answered

Moving a curve in one axis to ascertain area under the curve is zero

Calculate the value of the integral when d_opt = 0, and then use that to set d_opt to cancel the integral out. b = 0.1; ...

Moving a curve in one axis to ascertain area under the curve is zero

Calculate the value of the integral when d_opt = 0, and then use that to set d_opt to cancel the integral out. b = 0.1; ...

environ 3 ans ago | 1

Answered

How to input transfer function without simplifying it?

s = tf('s') G = (s+2)/(s*(s-1)*(s+6)^2) This gives a transfer function (tf) with the polynomials expanded G = ...

How to input transfer function without simplifying it?

s = tf('s') G = (s+2)/(s*(s-1)*(s+6)^2) This gives a transfer function (tf) with the polynomials expanded G = ...

environ 3 ans ago | 3

| accepted

Answered

Matlab's quad equals 0 when over 0 to 6 and actual value over 3 to 5

First, QUAD is very outdated, <https://www.mathworks.com/help/matlab/ref/integral.html INTEGRAL> (introduced in R2012a) is recom...

Matlab's quad equals 0 when over 0 to 6 and actual value over 3 to 5

First, QUAD is very outdated, <https://www.mathworks.com/help/matlab/ref/integral.html INTEGRAL> (introduced in R2012a) is recom...

environ 3 ans ago | 1

| accepted

Answered

How to ensure text on plot always in front?

One workaround would be to create an invisible axes on top, and then put the text in there. figure ax1 = axes; mesh(a...

How to ensure text on plot always in front?

One workaround would be to create an invisible axes on top, and then put the text in there. figure ax1 = axes; mesh(a...

plus de 3 ans ago | 2

| accepted

Answered

複数入力があるときのモデル同定（System Identification toolbox）

はい、多入力多出力モデルの同定も可能です。 例えば： <https://jp.mathworks.com/help/ident/examples/dealing-with-multi-variable-systems-identification-...

複数入力があるときのモデル同定（System Identification toolbox）

はい、多入力多出力モデルの同定も可能です。 例えば： <https://jp.mathworks.com/help/ident/examples/dealing-with-multi-variable-systems-identification-...

plus de 3 ans ago | 3

| accepted

Answered

looking for something similar for maximum filter calculation

Yes, in MATLAB the function is <https://www.mathworks.com/help/images/ref/imdilate.html IMDILATE>. The "NHOOD" argument is an...

looking for something similar for maximum filter calculation

Yes, in MATLAB the function is <https://www.mathworks.com/help/images/ref/imdilate.html IMDILATE>. The "NHOOD" argument is an...

plus de 3 ans ago | 0

| accepted

Answered

Applying equation to each field in a structure

For 4 variables, copy/pasting seems doable, but if you had a lot more I can see how it could be cumbersome. This is a soluti...

Applying equation to each field in a structure

For 4 variables, copy/pasting seems doable, but if you had a lot more I can see how it could be cumbersome. This is a soluti...

plus de 3 ans ago | 0

Answered

Would be possible to calculate half hour average by using retime?

Yes, there is an example a little bit down the in the documentation for <https://www.mathworks.com/help/matlab/ref/retime.html R...

Would be possible to calculate half hour average by using retime?

Yes, there is an example a little bit down the in the documentation for <https://www.mathworks.com/help/matlab/ref/retime.html R...

plus de 3 ans ago | 1

| accepted

Answered

How to save an axes within a GUI to a .fig

This might work. You create a new (temporary and invisible) figure, and then use COPYOBJ to copy that axes to the new figure. Y...

How to save an axes within a GUI to a .fig

This might work. You create a new (temporary and invisible) figure, and then use COPYOBJ to copy that axes to the new figure. Y...

plus de 3 ans ago | 4

| accepted

Answered

Is there any way I can make the attached contour plots more smooth ?

Maybe a median filter? However ORDFILT2 needs the Image Processing Toolbox. Z = peaks(501); % Sample data Z = Z +0.1*ran...

Is there any way I can make the attached contour plots more smooth ?

Maybe a median filter? However ORDFILT2 needs the Image Processing Toolbox. Z = peaks(501); % Sample data Z = Z +0.1*ran...

plus de 3 ans ago | 0

Answered

Why is getting Uniform Random Numbers so difficult!?!?

Try putting the seed value to: randi(intmax)

Why is getting Uniform Random Numbers so difficult!?!?

Try putting the seed value to: randi(intmax)

plus de 3 ans ago | 0

| accepted

Answered

Double integral with one integral having limits as a function of other variable

You can put functions inside of functions %% Embed A into fun_Z0, and tell INTEGRAL to only accept scalar inputs l1=3e...

Double integral with one integral having limits as a function of other variable

You can put functions inside of functions %% Embed A into fun_Z0, and tell INTEGRAL to only accept scalar inputs l1=3e...

plus de 3 ans ago | 0

| accepted

Answered

Where is the issue in my "while" statement?

You were on the right track. This gives 2520: n=1; while any( mod(n,1:10)~=0 ) n=n+1; end n Whe...

Where is the issue in my "while" statement?

You were on the right track. This gives 2520: n=1; while any( mod(n,1:10)~=0 ) n=n+1; end n Whe...

plus de 3 ans ago | 0

Answered

Numerical Integration with Parameters

For example, if the function is f(x) = 1+s*x+b*x^2 and you're integrating from 0 to 1, and you want to find the b (numerically) ...

Numerical Integration with Parameters

For example, if the function is f(x) = 1+s*x+b*x^2 and you're integrating from 0 to 1, and you want to find the b (numerically) ...

environ 4 ans ago | 0

Answered

System of differential equations with constant (as variables) coefficients

As has been mentioned, with the k's explicitly accounted for, it's very complicated. But if you consider the matrix X simply ...

System of differential equations with constant (as variables) coefficients

As has been mentioned, with the k's explicitly accounted for, it's very complicated. But if you consider the matrix X simply ...

environ 4 ans ago | 2