photo

George

Last seen: 3 jours il y a |  Actif depuis 2023

Followers: 0   Following: 0

Statistiques

  • Knowledgeable Level 2
  • 3 Month Streak
  • First Answer

Afficher les badges

Feeds

Afficher par

Réponse apportée
How to modify this code from MATHWORKS website?
Hello Basmah, There are a couple of things that you will need to change in order to get this example working with the phase cod...

2 mois il y a | 0

Réponse apportée
Interpolating Phased Array Toolbox patterns
Another thing to consider is that pattern also accepts optional azimuth and elevation angle input arguments: Plot array pattern...

6 mois il y a | 1

Réponse apportée
How can I develop a matlab code that used to fine the phase profile of a Reconfigurable intelligent surface? with contains a beamforming algorithm to locate the received wave
Take a look at this documentation page regarding simulating a RIS in Matlab: Introduction to Reconfigurable Intelligent Surface...

6 mois il y a | 0

Réponse apportée
How can I implement phased.freespace channel model outside matlab with moving target?
In addition to implementing this yourself, you could consider generating C/C++ code to deploy onto a real time system. All of th...

6 mois il y a | 0

Réponse apportée
Steer different subarrays in different directions or phase for constructive interference of beams from each subarray
Hello, I recommend you take a look at the ReplicatedSubarray object: Phased array formed by replicated subarrays - MATLAB (math...

8 mois il y a | 0

Réponse apportée
FMCW radar range estimation differences between phased.RangeResponse and fft
The main reason why you are see differences is because of the "RangeWindow" being set to Hann in the RangeResponse but not apply...

9 mois il y a | 0

| A accepté

Réponse apportée
How to modify FPGA-Based Beamforming in Simulink: Algorithm Design
Hello, As far as changing the example to work with 5 elements, it looks like the data for the example gets initialized in a c...

9 mois il y a | 0

| A accepté

Réponse apportée
How to use MVDREstimator2D with real acoustic signals received by rectangle Microphone array ?
Hello, I am not sure what your final goal is with this analysis, because you are using the MVDREstimator2D, I assume that you w...

10 mois il y a | 0

| A accepté

Réponse apportée
Up Conversion and Down Conversion in Phased Array Toolbox
Hi Waseem, you just need to input your baseband signal to the radiator object. If you look at the phased.Radiator object, you w...

10 mois il y a | 0

| A accepté

Réponse apportée
want to create phased array antenna as shown in picture
You can use a phased.ConformalArray to represent an array with arbitrary element positioning - https://www.mathworks.com/help/ph...

11 mois il y a | 0

Réponse apportée
How to apply MVDR to real signal?
Hi Marko, It looks like the simulation code that you posted is assuming that the input to the WidebandCollector is modulated, b...

12 mois il y a | 0

Réponse apportée
why am i getting the complex values after applying the phased.Freespace object to the rectangular waveform ouput
Hi Ijjada, To answer your questions: 1) You can use the phased.Collector to measure the phase of a signal in each antenna in a...

12 mois il y a | 0

Réponse apportée
What are the transmission side beamformer objects, that can be used for transmission side weights calculation and signal determination ?
Hi Rochelle, I would recommend taking a look at this documentation page: https://www.mathworks.com/help/phased/beamforming.htm...

12 mois il y a | 0

| A accepté