# Nehemiae

### MathWorks

Last seen: 2 mois il y a Actif depuis 2023

Followers: 0   Following: 0

I am an Intern in Engineering Development Group at MathWorks. My major responsibilities include working on the projects across the various verticals in MathWorks. My areas of interests include embedded software programming. Disclaimer: The opinions expressed here belong solely to me, and do not reflect the views of MathWorks.

Programming Languages:
C++, C, MATLAB, Arduino
Spoken Languages:
English
Professional Interests:
MATLAB Support Package for Arduino Hardware, Arduino Hardware, Embedded Systems

#### Feeds

Afficher par

Réponse apportée
Figure not rendering correctly in live script compared to figure window
Hello, Here are a few troubleshooting steps that can help: Ensure that your system meets the minimum requirements for MATLAB 2...

plus d'un an il y a | 0

Réponse apportée
Hello, To integrate the position data from Simulink for the Spatial Contact Force block, the Point Cloud block can be used. Her...

plus d'un an il y a | 0

Réponse apportée
Defining a 3d XYZ vector aligned with Z axis and then rotating it along the XY plane by pi/4
Hello, The coordinates defined indeed are aligned with the z-axis. To rotate a matrix by some degree, the “rotx”, “roty” and “r...

plus d'un an il y a | 0

Réponse apportée
Problem getting matlab to start using Ubuntu 22.04 ... did not have a problem previously
Hello, Here are a few ideas to troubleshoot the issue: See if your system meets the specifications for MATLAB in Linux (https:...

plus d'un an il y a | 0

Réponse apportée
I want to rotate the properties fromi=201:600(x) and J=201:600.(Y) That is the properties inside the area inside this area should be rotated. Can someone please help me?
Hello, To rotate to rotate the submatrix of data, the “imrotate” function can be used. In the example below, the rotation is li...

plus d'un an il y a | 0

Réponse apportée
Problem with LineWidth on Matlab online: increasing the thickness makes part of the lines disappear
Hello, Do have a look if your system meets the specifications for MATLAB Online (https://www.mathworks.com/support/requirements...

plus d'un an il y a | 0

Réponse apportée
How do I create a load duration curve for a wind turbine from a timeseries?
Hello, To plot the timeseries data of windspeed, the “plot” function can be used. Since the exported data contains the windspee...

plus d'un an il y a | 0

Réponse apportée
I want to generate different combinations of amplitudes. let say 10k random combinations. i am new to matlab, anyone who can help, how to generate it.
Hello, To generate a random set of amplitudes, the “rand” function can be used. This generates a random number from the uniform...

plus d'un an il y a | 0

Réponse apportée
In Simulink , How to read bus structure member which is enumeration signal (need to read specific enumerate)
Hello, Enumerated types in Simulink are read using the Enumerated Constant block, where one can give a single enumeration membe...

plus d'un an il y a | 0

| A accepté

Réponse apportée
Matlab R2022B tabs missing in top position (Mac)
Hello, Here are a few steps that could help solve this issue: Check if your system meets the required specifications for MATLA...

plus d'un an il y a | 0

Réponse apportée
Source Control Preferences not appear in matlab 2021a
Hello, To start a new git project, perform the following steps: On the Home tab, click New > Project > From Git. The New Pro...

plus d'un an il y a | 0

Réponse apportée
Blank Property Inspector on MATLAB 2022b -- MacOS Ventura 13.1?
Hello, To solve the issue, you can try the following: Check if your system meets the required specifications for MATLAB (http...

plus d'un an il y a | 0

Réponse apportée
Data inspector displays two signals in different ways
Hello, This appears to be because the signal ‘Warmtetransport door thermische schil” has been set with the interpolation proper...

plus d'un an il y a | 0

Réponse apportée
How to preprocess the ECG datset so that the QRS detection algorithms are more efficient
Hello, In order to see the plot more clearly, the “xlim” and “ylim” functions can be used to set the limits on the x-axis and y...

plus d'un an il y a | 0

Réponse apportée
Manual division of the colorbar
Hello, It is possible to create a colormap with colours specified over ranges of inputs, and then input values within the speci...

plus d'un an il y a | 2

Réponse apportée
ball falling down in simscape model
Hello, To simulate the ball resting on the lever, the Spatial Contact Force block is required, which allows the geometries of b...

plus d'un an il y a | 1

Réponse apportée
How can i set the Simulink lookup table output limit
Hello, The Output Minimum and Maximum properties in the 1-D lookup table, are the information stored for further optimizations ...

plus d'un an il y a | 0

Réponse apportée
How to use the output of one function as an input of another function
Hello, In order to pass the parameters (that are the outputs of one function – e.g. “MS_AA_imp”) to the function passed to the ...

plus d'un an il y a | 0

Réponse apportée
How to resolve the error "Conversion to cell from double is not possible"
Hello, Upon running the code with the provided MAT file, I got the following graphs as output with no errors in R2022b. If you ...

plus d'un an il y a | 0

Réponse apportée
Is there a way to get the input argument index of a function?
Hello, In order to index each parameter of a variable input argument list to a function, “varargin” can be used. This is an in...

plus d'un an il y a | 0

| A accepté

Réponse apportée
Double For cycle plotting
Hello, In order to make the two for loops update the same figure, the “hold on” command can be used in MATLAB. The code written...

plus d'un an il y a | 0

Réponse apportée
I'm not able to simulate a stable system in Simulink. States are being increased with no reason
Hello, On testing with your model, I am able to get the simulation output when setting the maximum step size to 0.001 and the ...

plus d'un an il y a | 0

Réponse apportée
Hello all, I need a support in order to develope a low pass filter on Simulink using this formula: val (new) = val (old) + (in - val (old)) * dT / T. Any idea ?
Hello, The equation provided can be implemented using unit delay blocks, gain blocks, etc. I have implemented the same below, ...

plus d'un an il y a | 1

Réponse apportée
Size mismatch between graphical signal and actual source signal
Hello, In order to get the data output from the S-function block, the “Dimensions” and “SamplingMode” properties of the output...

plus d'un an il y a | 0

Réponse apportée
Hello @Ultrareidar, I will assume an Excel file "Sample Data.xlsx", which has a column named DateTime with time logs for each d...

plus d'un an il y a | 0

| A accepté

Réponse apportée
How to add table to figure with subplots?
Hi @Nicholas Kavouris, It is my understanding that you require the "uitable" to appear in the 4th subplot region on the "uifigu...

plus d'un an il y a | 0

Réponse apportée
Nested for loop for a matrix
Hi @GAGANDEEP KAUR, From what I can understand, you are able to correctly set the array , but is not set correctly as it is re...

plus d'un an il y a | 0