Jay

Last seen: environ un mois il y a | Actif depuis 2023

Followers: 0 Following: 0

Statistiques

Feeds

Question

Which spectrum (pwelch vs. spectrumAnalyzer) is correct?
I have two data which I want to see difference in frequency domain. I tried with pwelch function which shows they are quite clos...

7 mois il y a | 1 réponse | 0

0

réponse

Question

Shows "vertcat error" in CIC
I had a vertcat error while using a CIC filter. It seems that's because y is a row vector. Once I changed y to a column vector l...

7 mois il y a | 1 réponse | 0

1

réponse

Question

FIR filter decomposition (single rate)?
I have a long single rate FIR filter. Due to a hardware limitation, I want to decompose it into two or more cascaded FIR filters...

8 mois il y a | 1 réponse | 0

1

réponse

Question

Filter cascade with raised cosine filter and half-band filter
I've created a raised cosine filter and a half-band filter, respectively, and want to cascade them. However, I got "Numeric stag...

10 mois il y a | 1 réponse | 0

1

réponse

Question

How to get LUT values from the NCO object?
I'm trying to learn NCO and MATLAB has the following example. df = 0.05; % Frequency resolution = 0.05 Hz minSFDR = 96; % Spur...

11 mois il y a | 1 réponse | 0

1

réponse

Question

Number of bits per symbol (m) range in Reed-Solomon coding
I'm playing around with Reed-Solomon codes. In the parameters of rsenc, help shows m represents the "number of bits per symbol" ...

plus d'un an il y a | 2 réponses | 0

2

réponses

Question

Update a value in a struct in another function
I have a struct which is initialized by this: function myStruct = defult_config myStruct.myLenth = 1; end myStruct.myLength ...

plus d'un an il y a | 2 réponses | 0

2

réponses

Question

How do I know how the output of FIR filter were calculated (e.g., each of summands of the FIR)?
For a given set of FIR coefficient b and input data input, I generate FIR output using filter function (e.g., output = filter(b,...

presque 2 ans il y a | 1 réponse | 0

1

réponse

Question

CIC compensation filter design
I have a CIC filter as below: Decimation factor: 20 Differential Delay: 1 Number of sections: 4 I created cicDecim object by...

presque 2 ans il y a | 1 réponse | 0

0

réponse

Question

How to do a Biquad (SOS) filtering
I have the following filters which I want to implement with cascade of multiple second-order sections (SOS). %% Filter_1 h = ...

presque 2 ans il y a | 1 réponse | 0

1

réponse

Question

convert decimal to hex with 3 digit
I just realized that converting -30 to hexadecial by dec2hex(-30) is different from its converting back by hex2dec('E2'). Any su...

environ 2 ans il y a | 1 réponse | 0

1

réponse

Question

The location of decimated sample in CIC Decimator?
In a CIC Decimator, which sample is chosen among others? For example, here is the original input. input = [x1 x2 x3 x4 x5 x6 x7...

environ 2 ans il y a | 1 réponse | 0

1

réponse

Question

The first CIC Decimator output is always zero
It seems that the first CIC Decimator output is always zero and I don't understand its behavior. I generated the input data and...

environ 2 ans il y a | 1 réponse | 0

1

réponse

Question

CIC decimation output is strange (Output word length and negative fractional length)
I'm implementing fixed point CIC decimation filter with following requirements -- Decimation factor: 20 Number of CIC stages: ...

environ 2 ans il y a | 1 réponse | 0

1

réponse

Question

Magnitude response of allpass filter - group-delay equalization of an IIR filter
In iirgrpdelay help page, the following example was provided for a group delay equalization of an IIR filter: [be,ae] = ellip(4...

environ 2 ans il y a | 1 réponse | 0

1

réponse

Question

Converting 4th order IIR filter to SOS (second-order sections)
I've designed 4th order allpass IIR filter using 'iirgrpdelay' and have the numerator and denominator which are 1-by-5 vectors. ...

environ 2 ans il y a | 1 réponse | 0

1

réponse

Réponse apportée
CPFSK demodulator performance in MATLAB example with enabling modulation index
This is self-answering - I found the reason why the error rates are strange other than "modulation index" of 0.5. CPFSKDemodulat...

environ 2 ans il y a | 0

| A accepté

Question

CPFSK demodulator performance in MATLAB example with enabling modulation index
I've been checking CPFSK performance against various modulation indices and SNR. MATLAB has nice examples in comm.CPFSKModulat...

environ 2 ans il y a | 1 réponse | 0

1

réponse

Question

Number of filter taps in Gaussian filter design
Hello, I'm desinging a pulse shaping filter where the filter covers a span of 5 inputs symbols and 12 times of input symbol r...

plus de 2 ans il y a | 1 réponse | 0

1

réponse

Question

Oversampling factor parameter for fsk modulation with gaussian shaping filter
Hello, I have been playing around with fskmod with gaussdesign (e.g., fsk modulation and filtering with a gaussian shaping filt...

plus de 2 ans il y a | 1 réponse | 0

1

réponse