info
Information about filter System object
Description
Examples
Obtain Filter Information
Obtain short-format and long-format information about a filter.
d = fdesign.lowpass; f = design(d,SystemObject=true); info(f)
ans = 6x35 char array
'Discrete-Time FIR Filter (real) '
'------------------------------- '
'Filter Structure : Direct-Form FIR'
'Filter Length : 43 '
'Stable : Yes '
'Linear Phase : Yes (Type 1) '
info(f,'long')
ans = 45x45 char array
'Discrete-Time FIR Filter (real) '
'------------------------------- '
'Filter Structure : Direct-Form FIR '
'Filter Length : 43 '
'Stable : Yes '
'Linear Phase : Yes (Type 1) '
' '
'Design Method Information '
'Design Algorithm : equiripple '
' '
'Design Options '
'Density Factor : 16 '
'Maximum Phase : false '
'Minimum Order : any '
'Minimum Phase : false '
'Stopband Decay : 0 '
'Stopband Shape : flat '
'SystemObject : true '
'Uniform Grid : true '
' '
'Design Specifications '
'Sample Rate : N/A (normalized frequency) '
'Response : Lowpass '
'Specification : Fp,Fst,Ap,Ast '
'Passband Ripple : 1 dB '
'Stopband Atten. : 60 dB '
'Passband Edge : 0.45 '
'Stopband Edge : 0.55 '
' '
'Measurements '
'Sample Rate : N/A (normalized frequency)'
'Passband Edge : 0.45 '
'3-dB Point : 0.46957 '
'6-dB Point : 0.48314 '
'Stopband Edge : 0.55 '
'Passband Ripple : 0.89042 dB '
'Stopband Atten. : 60.945 dB '
'Transition Width : 0.1 '
' '
'Implementation Cost '
'Number of Multipliers : 43 '
'Number of Adders : 42 '
'Number of States : 42 '
'Multiplications per Input Sample : 43 '
'Additions per Input Sample : 42 '
Decimate a Signal Using a CICDecimator Object
Create a dsp.CICDecimator
System object™ with DecimationFactor
set to 4. Decimate a signal from 44.1 kHz to 11.025 kHz.
cicdec = dsp.CICDecimator(4);
cicdec.FixedPointDataType = 'Minimum section word lengths';
cicdec.OutputWordLength = 16;
Create a fixed-point sinusoidal input signal of 1024 samples, with a sampling frequency of 44.1e3 Hz.
Fs = 44.1e3;
% 0.0232 sec signal
n = (0:1023)';
x = fi(sin(2*pi*1e3/Fs*n),true,16,15);
Create a dsp.SignalSource
object.
src = dsp.SignalSource(x,64);
Decimate the output with 16 samples per frame.
y = zeros(16,16); for ii = 1:16 y(ii,:) = cicdec(src()); end
Plot the first frame of the original and decimated signals. Output latency is 2 samples.
D = cicdec.DecimationFactor; diffDelay = cicdec.DifferentialDelay; NumSect = cicdec.NumSections; gainCIC = ... (D*diffDelay)^NumSect; stem(n(1:56)/Fs,double(x(4:59))) hold on; stem(n(1:14)/(Fs/D),double(y(1,3:end))/gainCIC,... 'r','filled') xlabel('Time (sec)') ylabel('Signal Amplitude') legend('Original signal',... 'Decimated signal',... 'Location','north') hold off;
Using the info
method in 'long'
format, obtain the word lengths and fraction lengths of the fixed-point filter sections and the filter output.
info(cicdec,'long')
ans = 'Discrete-Time FIR Multirate Filter (real) ----------------------------------------- Filter Structure : Cascaded Integrator-Comb Decimator Decimation Factor : 4 Differential Delay : 1 Number of Sections : 2 Stable : Yes Linear Phase : Yes (Type 1) Implementation Cost Number of Multipliers : 0 Number of Adders : 4 Number of States : 4 Multiplications per Input Sample : 0 Additions per Input Sample : 2.5 Fixed-Point Info Section word lengths : 20 19 19 18 Section fraction lengths : 15 14 14 13 Output word length : 16 Output fraction length : 11 '
Interpolate Signal Using CICInterpolator System object
Create a dsp.CICInterpolator
System object™ with InterpolationFactor
set to 2. Interpolate a fixed-point signal by a factor of 2 from 22.05 kHz to 44.1 kHz.
cicint = dsp.CICInterpolator(2)
cicint = dsp.CICInterpolator with properties: InterpolationFactor: 2 DifferentialDelay: 1 NumSections: 2 FixedPointDataType: 'Full precision'
Create a dsp.SineWave
object with SampleRate
set to 22.05 kHz, SamplesPerFrame
set to 32, and OutputDataType
set to 'Custom'
. To generate a fixed-point signal, set the CustomOutputDataType
property to a numerictype
object. For the purpose of this example, set the value to numerictype([],16)
. The fraction length is computed based on the values of the generated sinusoidal signal to give the best possible precision.
To generate a fixed-point signal, set the Method
property of the dsp.SineWave
object to 'Table lookup'
. This method of generating the sinusoidal signal requires that the period of every sinusoid in the output be evenly divisible by the sample period. That is, must be an integer value for every channel i = 1, 2, ..., N. The value of equals , the variable is the frequency of the sinusoidal signal, and is the sample rate of the signal. In other words, the ratio must be an integer. For more details, see the Algorithms section on the dsp.SineWave
object page.
In this example, is set to 22050 Hz and is set to 1050 Hz.
Fs = 22.05e3; sine = dsp.SineWave(Frequency=1050,... SampleRate=Fs,... SamplesPerFrame=32,... Method="Table lookup",... OutputDataType="Custom")
sine = dsp.SineWave with properties: Amplitude: 1 Frequency: 1050 PhaseOffset: 0 ComplexOutput: false Method: 'Table lookup' TableOptimization: 'Speed' SamplesPerFrame: 32 SampleRate: 22050 OutputDataType: 'Custom' Use get to show all properties
In each loop of the iteration, stream in a frame of the fixed-point sinusoidal signal sampled at 22.05 kHz. Interpolate the streamed signal by a factor of 2. The interpolated output has 64 samples per frame.
for i = 1:16 x = sine(); y = cicint(x); end
The output of the CIC interpolation filter is amplified by a specific gain value. You can determine this value using the gain
function. This gain equals the gain of the stage of the CIC interpolation filter and equals , where is the interpolation factor, is the differential delay, and is the number of sections of the CIC interpolator.
gainCIC = gain(cicint)
gainCIC = 2
To adjust this amplified output and to match it to the amplitude of the original signal, divide the CIC interpolated signal with the computed gain value.
Compare the last frames of the original and the interpolated signals. While plotting, account for the output latency of 2 samples.
n = (0:63)'; stem(n(1:31)/Fs,double(x(1:31)),'r','filled') hold on; I = cicint.InterpolationFactor; stem(n(1:61)/(Fs*I), ... double(y(4:end))/gainCIC,'b') xlabel('Time (sec)') ylabel('Signal Amplitude') legend('Original Signal',... 'Interpolated Signal',... 'location','north') hold off;
Using the info
function in the 'long'
format, obtain the word lengths and fraction lengths of the fixed-point filter sections and the filter output.
info(cicint,'long')
ans = 'Discrete-Time FIR Multirate Filter (real) ----------------------------------------- Filter Structure : Cascaded Integrator-Comb Interpolator Interpolation Factor : 2 Differential Delay : 1 Number of Sections : 2 Stable : Yes Linear Phase : Yes (Type 1) Implementation Cost Number of Multipliers : 0 Number of Adders : 4 Number of States : 4 Multiplications per Input Sample : 0 Additions per Input Sample : 6 Fixed-Point Info Section word lengths : 17 17 17 17 Section fraction lengths : 14 14 14 14 Output word length : 17 Output fraction length : 14 '
Input Arguments
sysobj
— Input filter
filter System object
One of the following types of filter System objects:
infoType
— Amount of information to display
'short'
(default) | 'long'
Amount of filter information to be displayed. When this property is set to:
'short'
–– The function displays the same information asinfo(sysobj)
, which is the basic filter information.'long'
–– The function returns the following information about the filter:Specifications such as the filter structure and filter order.
Information about the design method and options.
Performance measurements for the filter response, such as the passband cutoff or stopband attenuation, included in the
measure
method.
Cost of implementing the filter in terms of operations required to apply the filter to data, included in the
cost
method.
When the filter uses fixed-point arithmetic, the function returns additional information about the filter, including the arithmetic setting and details about the filter internals.
Data Types: char
| string
arithType
— Arithmetic type
'double'
(default) | 'single'
| 'Fixed'
Arithmetic used in the filter analysis, specified as 'double'
,
'single'
, or 'Fixed'
. When the arithmetic
input is not specified and the filter System object is unlocked, the analysis tool assumes a double-precision filter. When the
arithmetic input is not specified and the System object is locked, the function performs the analysis based on the data type of
the locked input.
The 'Fixed'
value applies to filter System objects with fixed-point
properties only.
When the 'Arithmetic'
input argument is specified as
'Fixed'
and the filter object has the data type of the
coefficients set to 'Same word length as input'
, the arithmetic
analysis depends on whether the System object is unlocked or locked.
unlocked –– The analysis object function cannot determine the coefficients data type. The function assumes that the coefficients data type is signed, has a 16-bit word length, and is auto scaled. The function performs fixed-point analysis based on this assumption.
locked –– When the input data type is
'double'
or'single'
, the analysis object function cannot determine the coefficients data type. The function assumes that the data type of the coefficients is signed, has a 16-bit word length, and is auto scaled. The function performs fixed-point analysis based on this assumption.
To check if the System object is locked or unlocked, use the isLocked
function.
When the arithmetic input is specified as 'Fixed'
and the filter
object has the data type of the coefficients set to a custom numeric type, the object
function performs fixed-point analysis based on the custom numeric data type.
Output Arguments
s
— store filter information
character array
Filter information, returned as a character array.
When the infoType
is 'short'
, the
function displays basic filter information. When the
infoType
is 'long'
, the function
displays the following information:
Specifications such as the filter structure and filter order
Information about the design method and options
Performance measurements for the filter response, such as the passband cutoff or stopband attenuation, included in the
measure
methodCost of implementing the filter in terms of operations required to apply the filter to data, included in the
cost
method
When the filter uses fixed-point arithmetic, the function returns additional information about the filter, including the arithmetic setting and details about the filter internals.
Version History
Introduced in R2011aR2024b: dsp.BiquadFilter
object warns
The dsp.BiquadFilter
object issues a warning and will be removed
in a future release. Use the dsp.SOSFilter
object instead. For more information on how to replace
your existing code, see the Compatibility Considerations
section in the dsp.BiquadFilter
reference page.
R2023b: Support for dsp.ParallelFilter
and dsp.Delay
Objects
Starting in R2023b, the info
analysis function supports the
dsp.ParallelFilter
and the dsp.Delay
objects.
R2023b: dsp.BiquadFilter
object will be removed
The dsp.BiquadFilter
object will be removed in a future release.
Use the dsp.SOSFilter
object instead.
Commande MATLAB
Vous avez cliqué sur un lien qui correspond à cette commande MATLAB :
Pour exécuter la commande, saisissez-la dans la fenêtre de commande de MATLAB. Les navigateurs web ne supportent pas les commandes MATLAB.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)