Mix Analog and Digital Signals
In electronic systems that combine analog processing with logic gates, several parameters are essential to the overall behavior of the system. These parameters include the finite slew rate of circuit output signals, the propagation delay of signals, and the exact decision threshold of circuit inputs. Add blocks to your model to include these effects in time domain simulations of the system.
|Linear Circuit Wizard||Generate or modify linear circuit|
|Slew Rate||Model amplitude, rise and fall times, and propagation delay of logic gates|
|Logic Decision||Threshold crossing detector at input to binary process|
|Operational Amplifier||Model operational amplifier with two or more poles|
|Variable Pulse Delay||Delay samples by controlled, continuously variable amount|
|Lowpass Resampler||Convert signal from one sample time to another|
|Binary Vector Conversion||Convert scalar integer to binary logic vector and vice versa|
|Clock Generator||Generate clock signal with one or more phases|
|Signal Sampler||Sample incoming signal at the edge of incoming clock|
- Model Linear Circuit Response from SPICE Netlist
Model the response of a linear circuit described by a SPICE netlist.
- Ports Supported in Linear Circuit Wizard
Review and modify the ports of a linear circuit before generating a block to model it.
- Define Device Noise Using Linear Circuit Wizard
You can use the Linear Circuit Wizard block to model the device noise generated by a linear circuit.
- MATLAB Systems Generated from Linear Circuit Wizard
You can use a single Linear Circuit Wizard block to configure one or more MATLAB System blocks.
- Design Inverting Amplifier
This example shows how to model an inverting amplifier circuit using the Operational Amplifier block and the Linear Circuit wizard block.