La traduction de cette page n'est pas à jour. Cliquez ici pour voir la dernière version en anglais.
Ports and Subsystems
R2026aBlocs associés aux sous-systèmes tels que Inport, Outport, Subsystem et Model
Utilisez les blocs de la bibliothèque Ports and Subsystems pour créer des ports d'entrée et de sortie ainsi que des sous-systèmes conditionnels, itérateurs et variants.
Blocs
 | Enable | Add enable port to subsystem or model |
 | Enabled Subsystem | Subsystem whose execution is enabled by external input |
 | Enabled and Triggered Subsystem | Subsystem whose execution is enabled and triggered by external inputs |
 | For Each Subsystem | Apply algorithm to individual elements or subarrays of input signals or mask parameters |
 | For Iterator Subsystem | Repeat subsystem execution during simulation time step for specified number of iterations |
 | Function Element | Specify function to provide via exporting function port (depuis R2022a) |
 | Function Element Call | Specify function call to issue via invoking function port (depuis R2022a) |
 | Function-Call Feedback Latch | Break feedback loop involving data signals between function-call blocks |
 | Function-Call Generator | Provide function-call events to control execution of subsystem or model |
 | Function-Call Split | Provide junction for splitting function-call line |
 | Function-Call Subsystem | Subsystem whose execution is controlled by external function-call input |
 | If | Sélectionner l’exécution du sous-système en utilisant une logique semblable à l’instruction if-else |
 | If Action Subsystem | Subsystem whose execution is enabled by If block |
 | In Bus Element | Select input from external port |
 | Inport | Create input port for subsystem or external input |
 | Model | Reference another model to create model hierarchy |
 | Out Bus Element | Specify output of external port |
 | Outport | Create output port for subsystem or external output |
 | Resettable Subsystem | Subsystem whose block states reset with external trigger |
 | Subsystem | Group blocks to create model hierarchy |
 | Switch Case | Sélectionner l’exécution du sous-système en utilisant une logique semblable à l’instruction switch |
 | Switch Case Action Subsystem | Subsystem whose execution is enabled by Switch Case block |
 | Trigger | Add trigger or function port to subsystem or model |
 | Triggered Subsystem | Subsystem whose execution is triggered by external input |
 | Unit System Configuration | Restrict units to specified allowed unit systems |
 | Variant Subsystem | Template subsystem containing Subsystem blocks as variant choices |
 | While Iterator Subsystem | Repeat subsystem execution during simulation time step while logical expression is true |
Rubriques
- Use Control Flow Logic
How to use control flow blocks to model control logic.
