how can i calculate the bandwidth of this voice signal

how can i find the bandwidth of this voice signal?

[Star Strider]

How is ‘bandwidth’ defined here?

Answer 1

[Mathieu NOE]

hello

I guess that what you want to know is the frequency extension of the signal

here I take an averaged fft spectrum, then the envelop of it and I search for the upper frequency limits defined by how much dB amplitude compared to peak amplitude of signal spectrum

here i look for the frequency that correspond to a a point 20 dB below the max envelope value

BW_dB_threshold = 20; % signal bandwith at BW_dB_threshold  decibels below peak amplitude

this plot should help you understand my suggestion :

here the frequency bandwith (given by variable freq_up) is about 4 kHz

code below :

clc

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% load signal
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

[signal,Fs] = audioread('test_voice.wav');

[samples,channels] = size(signal);

dt = 1/Fs;

time = (0:samples-1)*dt;

selected_channel = 1; % select your data channel here
signal = signal(:,selected_channel); 

BW_dB_threshold = 20; % signal bandwith at BW_dB_threshold  decibels below peak amplitude

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% display 1 : averaged FFT spectrum
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% if you are dealing with acoustics, you may wish to have A weighted
% spectrums 
% option_w = 0 : linear spectrum (no weighting dB (L) )
% option_w = 1 : A weighted spectrum (dB (A) )
option_w = 1;

NFFT = 1024;    % fft length
OVERLAP = 0.75; % between 0 and 1 max ;  buffer overlap = OVERLAP*NFFT

[freq, sensor_spectrum] = myfft_peak(signal,Fs,NFFT,OVERLAP);
% remove 0 Hz data (especially if we want tu use pondA
ind = find(freq>0);
freq = freq(ind);
sensor_spectrum = sensor_spectrum(ind,:);


% convert to dB scale (ref = 1)
sensor_spectrum_dB = 20*log10(sensor_spectrum);

% apply A weigthing if needed
if option_w == 1
    pondA_dB = pondA_function(freq);
    sensor_spectrum_dB = sensor_spectrum_dB+pondA_dB;
    my_ylabel = ('Amplitude (dB (A))');
else
    my_ylabel = ('Amplitude (dB (L))');
end


% add upper enveloppe
[YUPPER,YLOWER] = envelope(sensor_spectrum_dB,25,'peak');
thr = max(YUPPER)- BW_dB_threshold;
[~,~,freq_up,~]= crossing_V7(YUPPER,freq,thr,'linear'); % positive (pos) and negative (neg) slope crossing points 

disp(['Max freq : ' num2str(freq_up)]);

figure(1),semilogx(freq,sensor_spectrum_dB,'b',freq,YUPPER,'r',freq,thr*ones(size(freq)),'k--',freq_up,s0_neg,'dg','linewidth',2,'markersize',12);grid on
% figure(1),semilogx(freq,sensor_spectrum_dB,'b');grid on
title(['Averaged FFT Spectrum  / Fs = ' num2str(0.1*round(10*Fs)) ' Hz / Delta f = ' num2str(0.1*round(10*(freq(2)-freq(1)))) ' Hz ']);
xlabel('Frequency (Hz)');ylabel('Amplitude');
legend('signal spectrum','signal spectrum envelope','threshold line',['max frequency (= bandwith) : ' num2str(round(freq_up)) 'Hz']);

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

function pondA_dB = pondA_function(f)
	% dB (A) weighting curve
	n = ((12200^2*f.^4)./((f.^2+20.6^2).*(f.^2+12200^2).*sqrt(f.^2+107.7^2).*sqrt(f.^2+737.9^2)));
	r = ((12200^2*1000.^4)./((1000.^2+20.6^2).*(1000.^2+12200^2).*sqrt(1000.^2+107.7^2).*sqrt(1000.^2+737.9^2))) * ones(size(f));
	pondA = n./r;
	pondA_dB = 20*log10(pondA(:));
end

function  [freq_vector,fft_spectrum] = myfft_peak(signal, Fs, nfft, Overlap)
% FFT peak spectrum of signal  (example sinus amplitude 1   = 0 dB after fft).
% Linear averaging
%   signal - input signal, 
%   Fs - Sampling frequency (Hz).
%   nfft - FFT window size
%   Overlap - buffer percentage of overlap % (between 0 and 0.95)

[samples,channels] = size(signal);

% fill signal with zeros if its length is lower than nfft
if samples<nfft
    s_tmp = zeros(nfft,channels);
    s_tmp((1:samples),:) = signal;
    signal = s_tmp;
    samples = nfft;
end

% window : hanning
window = hanning(nfft);
window = window(:);

%    compute fft with overlap 
 offset = fix((1-Overlap)*nfft);
 spectnum = 1+ fix((samples-nfft)/offset); % Number of windows
%     % for info is equivalent to : 
%     noverlap = Overlap*nfft;
%     spectnum = fix((samples-noverlap)/(nfft-noverlap));	% Number of windows

    % main loop
    fft_spectrum = 0;
    for i=1:spectnum
        start = (i-1)*offset;
        sw = signal((1+start):(start+nfft),:).*(window*ones(1,channels));
        fft_spectrum = fft_spectrum + (abs(fft(sw))*4/nfft);     % X=fft(x.*hanning(N))*4/N; % hanning only 
    end
    fft_spectrum = fft_spectrum/spectnum; % to do linear averaging scaling

% one sidded fft spectrum  % Select first half 
    if rem(nfft,2)    % nfft odd
        select = (1:(nfft+1)/2)';
    else
        select = (1:nfft/2+1)';
    end
fft_spectrum = fft_spectrum(select,:);
freq_vector = (select - 1)*Fs/nfft;
end

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
function [t0_pos,s0_pos,t0_neg,s0_neg] = crossing_V7(S,t,level,imeth)

% [ind,t0,s0,t0close,s0close] = crossing_V6(S,t,level,imeth,slope_sign) % older format

% CROSSING find the crossings of a given level of a signal
%   ind = CROSSING(S) returns an index vector ind, the signal
%   S crosses zero at ind or at between ind and ind+1
%   [ind,t0] = CROSSING(S,t) additionally returns a time
%   vector t0 of the zero crossings of the signal S. The crossing
%   times are linearly interpolated between the given times t
%   [ind,t0] = CROSSING(S,t,level) returns the crossings of the
%   given level instead of the zero crossings
%   ind = CROSSING(S,[],level) as above but without time interpolation
%   [ind,t0] = CROSSING(S,t,level,par) allows additional parameters
%   par = {'none'|'linear'}.
%	With interpolation turned off (par = 'none') this function always
%	returns the value left of the zero (the data point thats nearest
%   to the zero AND smaller than the zero crossing).
%


% check the number of input arguments
error(nargchk(1,4,nargin));

% check the time vector input for consistency
if nargin < 2 | isempty(t)
	% if no time vector is given, use the index vector as time
    t = 1:length(S);
elseif length(t) ~= length(S)
	% if S and t are not of the same length, throw an error
    error('t and S must be of identical length!');    
end

% check the level input
if nargin < 3
	% set standard value 0, if level is not given
    level = 0;
end

% check interpolation method input
if nargin < 4
    imeth = 'linear';
end


% make row vectors
t = t(:)';
S = S(:)';

% always search for zeros. So if we want the crossing of 
% any other threshold value "level", we subtract it from
% the values and search for zeros.
S   = S - level;

% first look for exact zeros
ind0 = find( S == 0 ); 

% then look for zero crossings between data points
S1 = S(1:end-1) .* S(2:end);
ind1 = find( S1 < 0 );

% bring exact zeros and "in-between" zeros together 
ind = sort([ind0 ind1]);

% and pick the associated time values
t0 = t(ind); 
s0 = S(ind);

if ~isempty(ind)

    if strcmp(imeth,'linear')
        % linear interpolation of crossing
        for ii=1:length(t0)
            %if abs(S(ind(ii))) >= eps(S(ind(ii)))    % MATLAB V7 et +
            if abs(S(ind(ii))) >= eps*abs(S(ind(ii)))    % MATLAB V6 et -    EPS * ABS(X)

                % interpolate only when data point is not already zero
                NUM = (t(ind(ii)+1) - t(ind(ii)));
                DEN = (S(ind(ii)+1) - S(ind(ii)));
                slope =  NUM / DEN;
                slope_sign(ii) = sign(slope);
                t0(ii) = t0(ii) - S(ind(ii)) * slope;
                s0(ii) = level;
            end
        end
    end

    % extract the positive slope crossing points 
    ind_pos = find(sign(slope_sign)>0);
    t0_pos = t0(ind_pos);
    s0_pos = s0(ind_pos);

    % extract the negative slope crossing points 
    ind_neg = find(sign(slope_sign)<0);
    t0_neg = t0(ind_neg);
    s0_neg = s0(ind_neg);

else

    % empty output
    ind_pos = [];
    t0_pos = [];
    s0_pos = [];

    % extract the negative slope crossing points 
    ind_neg = [];
    t0_neg = [];
    s0_neg = [];
    
end

end

[Mathieu NOE]

hello

problem solved ?