How do I find the peak of a signal and the time of peak?
2 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Tanay Kumar
le 21 Sep 2022
Réponse apportée : Kiran Kintali
le 25 Sep 2022
I am trying to implement a model in simulink in which I need to identify the magnitude and time of the occurance of the peak (max magnitude) for a time varying discrete signal. I can not use a buffer because it does not have HDL support. I tried using MinMax Running Resettable block but that only gives the magnitude and not the time. Any idea how can I do this?
Thanks in advance!
0 commentaires
Réponse acceptée
Timo Dietz
le 21 Sep 2022
Modifié(e) : Timo Dietz
le 21 Sep 2022
Hello,
if you are already able to catch the 'max', just attach a 'Detect Change' block to it and apply this output to a triggered subsystem. (The subsystem contains just a connection from input to output.)
The input of the subsystem should now be connected to a 'Clock' block. Thus, the output delievers the current clock value, each time a new max has been detected.
Btw, for the max detection you can just use a 2-input max block. One input connected to the signal and the second to the max blocks output via a unit delay block - as feedback.
Does this solve your issue?
4 commentaires
Timo Dietz
le 21 Sep 2022
It's even more easy:
Just use a 'greater than' one input connected to the signal, the other to the unit delay output.
The output of this block is the trigger for the subsystem.
Now add a second in/out path to the triggered subsystem, one input connected to your signal, the other to the Clock.
Finally connect the output of the subsystem which delivers the signal max to the input of the unit delay.
Thus, you need no 'detect change' and no 'max' block. :-)
Please accept one or the other answer to close this question - provided that your issue is solved :-)
Timo Dietz
le 21 Sep 2022
Modifié(e) : Timo Dietz
le 21 Sep 2022
Concerning the three last peaks:
Provided that a got your point, you can just attach unit delay blocks to your current max value and stored Clock (both outputs of the triggered subsystem block in the second solution I described).
Attach the outputs of the delay blocks to the inputs of a second triggered subsystem (copy of the first).
Again, these outputs to the inputs of a third subsystem.
The trigger inputs for the subsystems are all the same.
The subysystems outputs should deliver the last three value/time pairs.
Plus de réponses (1)
Kiran Kintali
le 25 Sep 2022
Sharing HDL Coder compatible Peak Detector example here.
0 commentaires
Voir également
Produits
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!