Timing error happened when seting series IIR filter in Speedgoat target machine
2 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
ERIC hu
le 31 Oct 2022
Réponse apportée : Kiran Kintali
le 31 Oct 2022
Hi alls
I 'm using HDL Coder with simulink for building a set of IIR filters in series in Speedgoat target machine.
I used the following three methods:
1.Connect Biquad block in turn; (As shown in the following figure)
2.Connect Discrete Transfer Fcn block in turn;
3,Use add, gain and delay blocks to build Direct Form II IIR filter and then connecting them in turn.
I can get a correct filtering result in simulink. However, when using the HDL Workflow Advisor of HDL code and run the generated gm_.slx on speedgoat target mechine, the results were always wrong. I suspect it's a time sequence problem, but I don't know how to solve it or what to set up. Or is there a better way to build an IIR filter model that can be connected in series.
THANKS advanced,
ERIC
0 commentaires
Réponse acceptée
Kiran Kintali
le 31 Oct 2022
Please reach out to tech support for guidance on the topic with your model.
You can use the workflow to get a high level view of the critical path in your model.
0 commentaires
Plus de réponses (0)
Voir également
Catégories
En savoir plus sur Digital Filter Design dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!