I see the following error message in HDL Workflow Advisor: "Specified part could not be found" & "No parts matched 'xczu49dr-​ffvf1760-2​-e-es1'"

Failed Task "Vivado IP Packager" unsuccessful. See log for details. Generated logfile: hdl_prj\hdlsrc\OFDM_Tx_HW_test\workflow_task_VivadoIPPackager.log

Error hdlturnkey.ip.IPEmitterVivado/generateIPCore

Error hdlturnkey.ip.IPDriver/generateIPCore

Error hdlturnkey.TurnkeyDriver/makehdlturnkeycore

Error hdlturnkey.TurnkeyDriver/makehdlturnkey

Error slhdlcoder.HDLCoder/makehdlturnkey

Error downstream.DownstreamIntegrationDriver/runIPCoreCodeGen

Error generateIPCore

Error Simulink.ModelAdvisor/executeCheckCallbackFct

Error Simulink.ModelAdvisor/run

Error Simulink.ModelAdvisor/runCheck

Error ModelAdvisor.Node/runTaskAdvisor

If I check the log at hdl_prj\hdlsrc\OFDM_Tx_HW_test\workflow_task_VivadoIPPackager.log, I see the following error massage:

Task "Vivado IP Packager" unsuccessful. See log for details.
Generated logfile: 

****** Vivado v2020.2 (64-bit)
**** SW Build 3064766 on Wed Nov 18 09:12:45 MST 2020
**** IP Build 3064653 on Wed Nov 18 14:17:31 MST 2020
** Copyright 1986-2020 Xilinx, Inc. All Rights Reserved.

source vivado_ip_package.tcl -notrace
WARNING: [Device 21-436] No parts matched 'xczu49dr-ffvf1760-2-e-es1'
ERROR: [Coretcl 2-106] Specified part could not be found.
INFO: [Common 17-206] Exiting Vivado at Sat Apr  1 21:51:25 2023...
    
Elapsed time is 2.5591 seconds.

[Kiran Kintali]

Can you share reproduction steps? Thanks

[jiongbin deng]

When I use HDL Workflow Advisor to generate IP core, the message is display in the last step of HDL Code Generation:

Failed: Task "Vivado IP Packager" unsuccessful. See log for details. Generated logfile: hdl_prj\hdlsrc\OFDM_Tx_HW_test\workflow_task_VivadoIPPackager.log

Error hdlturnkey.ip.IPEmitterVivado/generateIPCore

Error hdlturnkey.ip.IPDriver/generateIPCore

Error hdlturnkey.TurnkeyDriver/makehdlturnkeycore

Error hdlturnkey.TurnkeyDriver/makehdlturnkey

Error slhdlcoder.HDLCoder/makehdlturnkey

Error downstream.DownstreamIntegrationDriver/runIPCoreCodeGen

Error generateIPCore

Error Simulink.ModelAdvisor/executeCheckCallbackFct

Error Simulink.ModelAdvisor/run

Error Simulink.ModelAdvisor/runCheck

Error ModelAdvisor.Node/runTaskAdvisor

And I check the log, I see the following message:

Task "Vivado IP Packager" unsuccessful. See log for details.

Generated logfile:

****** Vivado v2020.2 (64-bit)

**** SW Build 3064766 on Wed Nov 18 09:12:45 MST 2020

**** IP Build 3064653 on Wed Nov 18 14:17:31 MST 2020

** Copyright 1986-2020 Xilinx, Inc. All Rights Reserved.

source vivado_ip_package.tcl -notrace

WARNING: [Device 21-436] No parts matched 'xczu49dr-ffvf1760-2-e-es1'

ERROR: [Coretcl 2-106] Specified part could not be found.

INFO: [Common 17-206] Exiting Vivado at Sat Apr 1 21:51:25 2023...

[Kiran Kintali]

It would be helpful if you can provide the model. Is this happening with a MathWorks shipping example or your own custom logic?

Answer 1

[Stefanie Schwarz]

The error message occurs because the FPGA part 'xczu49dr-ffvf1760-2-e-es1' is missing from your Xilinx Vivado installation. You need to add this Zynq UltraScale+ part to your Vivado installation, and make sure you have a Vivado license for it (Zynq UltraScale+ parts are not available in the free Vivado ML version).

See this MATLAB Answer for details:

https://www.mathworks.com/matlabcentral/answers/2000807-why-do-i-get-the-xilinx-vivado-error-message-specified-part-could-not-be-found-during-ip-core-gene