fatal error: rtiostream_utils.h: No such file or directory

I have a trouble when I deploy my Simulink model to Raspberry Pi 3 hardware.

My Model works just fine in EXTERNAL MODE.

Just after running on EXTERNAL MODE, I deployed to the hardware.

Then, the error occurs.

I thought that the error is because "rtiostream_utils.h" is missing guessing from the error log.

I searched on the internet and there were some people that has the same problem.

I also went to the last part of the link below. "Software Interface Model Fails to Build". https://jp.mathworks.com/help/supportpkg/usrpembeddedseriesradio/ug/troubleshooting-hardware-software-co-design.html

When I deploy to the hardware, the simulation mode in the pull down window is "external".

Please give me some idea to solve this problem.

If you need any more information, please feel free to ask me.

I will be looking forward to hear from you soon.

Thank you.

Answer 1

[Julia Antoniou]

Hi Fumi,

I was running into the same error when trying to deploy my model to hardware after previously running it successfully on external mode. I was able to resolve the error by changing my active configuration set. To do this:

1) In your Simulink model, go to View > Model Explorer > Model Explorer

2) In the left "Model Hierarchy" pane, select your model.

3) In the middle pane, see if "External Mode Configuration" is active (the icon will be green). If so, right click on the other listed configuration, and select "Activate". For me, this other configuration was just named "Configuration". This is what my model explorer looked like after activating the other configuration set:

4) Once I changed the simulation mode back to "normal" and tried building my model, the error was resolved.

Hope this helps!

-Julia

[Sarahaime Rodríguez]

Thanks!

[Sebastian Feldmann]

Thx so much :>

[Daniel Gelman]

I am having the same problem as OP. I only have "External Mode Configuration", which is active (green). However, I do not have any other listed configuration to "activate". What else can I do?

[Engr.Saad Fareed]

Thank You...So Much.

[Juan Carlos Arjona Sánchez]

GRANDE SEÑORA, god bless u

[R SRIRANJANI RAMAKRISHNAN]

it solved the problem thank you

[Fumi_Maru]

I'm glad to hear that!

[Salomón Martínez Álvarez]

Thank you very much!, it helped me solve my problem :)

[Carla Fernández]

It solved my problem with an Android device too, thanks a lot!!!

[Fumi_Maru]

I'm glad to hear that!

[Chu Minh Duc]

It solved my problem, thank you a lot!

[Anthony Comer]

You have saved me from going insane. I can sleep tonight because of this!

[Fumi_Maru]

I'm glad to hear it's helping a lot of people!!

[Claudio Brito]

Thank you, it worked for me as well!

[Yuxin Qu]

Thank you!

Answer 2

[Arthur Preuss]

It solved my problem, thank you a lot!

I was actually able to run on external model, when suddenly it stopped being able to compile. Than I followed these steps and it worked well in external mode again.

[Ammar N. Abbas]

It solved the problem perfectly. (Y)