![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/193414/image.jpeg)
Add noise to multi-signals
2 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
I want to simulate a received signal which has three sins-wave signals at different frequencies with difference amplitudes and phases, say: (f(i), a(i), p(i)), i=1,2,3. The receiver has certain noise. The Rx noise compares with the received signal powers, we have SNR(i).
How do I model this signal in time-domain?
1 commentaire
KALYAN ACHARJYA
le 3 Août 2018
Modifié(e) : KALYAN ACHARJYA
le 3 Août 2018
%Here Sine signals, what you are expecting next?
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/193414/image.jpeg)
Réponses (1)
KALYAN ACHARJYA
le 3 Août 2018
%Change the paramerts as per requirements
t=0:.01:13;
noiseAmplitude=randi(5);
noise=noiseAmplitude* rand(1, length(t));
w1=3;w2=4;w3=5;
amp=6;
phase=30;
y1=amp*sin(w1*t+phase)+ noise;
plot(y1,'r','linewidth',1.5);
hold on;
y2=1.3*amp*sin(w2*t+phase+10)+noise;
plot(y2,'linewidth',1.5);
y3=1.5*amp*sin(w3*t+phase+20)+noise;
plot(y3,'g','linewidth',1.5);
hold off;
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/192986/image.jpeg)
2 commentaires
KALYAN ACHARJYA
le 4 Août 2018
Modifié(e) : KALYAN ACHARJYA
le 4 Août 2018
For that you have to use some fixed value, I have used the random value
rand(1, length(t))
- Just assign data (Not random)
- find the SNR of the signal
- Do the back calculation, how much data assign required to find the required SNR
I have answered it as per question at the heading.
Voir également
Catégories
En savoir plus sur Transmitters and Receivers dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!