Add noise to multi-signals

4 vues (au cours des 30 derniers jours)
Chen
Chen le 2 Août 2018
I want to simulate a received signal which has three sins-wave signals at different frequencies with difference amplitudes and phases, say: (f(i), a(i), p(i)), i=1,2,3. The receiver has certain noise. The Rx noise compares with the received signal powers, we have SNR(i).
How do I model this signal in time-domain?
  1 commentaire
KALYAN ACHARJYA
KALYAN ACHARJYA le 3 Août 2018
Modifié(e) : KALYAN ACHARJYA le 3 Août 2018
%Here Sine signals, what you are expecting next?

Connectez-vous pour commenter.

Réponses (1)

KALYAN ACHARJYA
KALYAN ACHARJYA le 3 Août 2018
%Change the paramerts as per requirements
t=0:.01:13;
noiseAmplitude=randi(5);
noise=noiseAmplitude* rand(1, length(t));
w1=3;w2=4;w3=5;
amp=6;
phase=30;
y1=amp*sin(w1*t+phase)+ noise;
plot(y1,'r','linewidth',1.5);
hold on;
y2=1.3*amp*sin(w2*t+phase+10)+noise;
plot(y2,'linewidth',1.5);
y3=1.5*amp*sin(w3*t+phase+20)+noise;
plot(y3,'g','linewidth',1.5);
hold off;
  2 commentaires
Chen
Chen le 3 Août 2018
Many thanks Kalyan for your example, can you let me know how can add the noise to each signal with specific SNRs, for example, in your example, we assume SNR for three signal are 10, -5, -15 dB, respectively. Cheers chen
KALYAN ACHARJYA
KALYAN ACHARJYA le 4 Août 2018
Modifié(e) : KALYAN ACHARJYA le 4 Août 2018
For that you have to use some fixed value, I have used the random value
rand(1, length(t))
  • Just assign data (Not random)
  • find the SNR of the signal
  • Do the back calculation, how much data assign required to find the required SNR
I have answered it as per question at the heading.

Connectez-vous pour commenter.

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by