Why are the lines not showing up on my graphs?
1 vue (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Anna Zito
le 25 Mai 2020
Commenté : Star Strider
le 25 Mai 2020
g=9.81;
Ta=10;
mA=20;
for i=1:100
M=(i-1)*(30/99);
mB=4.05;
mC=M;
mD=M;
JC=0.005*M;
JD=JC;
JA=0.8055;
A=[mA 0 -1 1 0 0 0; (5*JA) 0 0.2 0 0 0 0; (10*JC) 0 0 -0.1 0 0.1 0; 0 mD 0 0 -1 -1 -1; 0 (10*JD) 0 0 0 -0.1 0.1; 0 mB 0 0 -1 0 0; -0.5 1 0 0 0 0 0];
B=[0; Ta; 0; (-mD*g); 0; (-mB*g); 0];
x=inv(A)*B;
aA(i)=x(1); aB(i)=x(2); FA(i)=x(3); TA(i)=x(4); TB(i)=x(5); TC(i)=x(6); TD(i)=x(7);
end
Mvector=linspace(0,30,100);
plot(Mvector, aA(i),'g',Mvector,aB(i),'b-.');
title('Acceleration');
legend('Disk A','Mass B');
xlabel('M (kg)');
ylabel('Acceleration (m/s^2)');
pause
plot(Mvector,aA(i),'g',Mvector,aB(i),'b-.');
title('Acceleration');
legend('Disk A','Mass M');
xlabel('M (kg)');
ylabel('acceleration (m/s^2)');
pause
plot(Mvector, FA(i),'k');
title('Plot 3');
xlabel('M (kg)');
ylabel('FA (N)');
pause
plot(Mvector,TA(i),'g',Mvector,TB(i),'b-.');
title('Plot 4');
legend('Cable A','Cable B');
xlabel('M (kg)');
ylabel('Tension (N))');
pause
plot(Mvector,TA(i),'g',Mvector,TC(i),'b:',Mvector,TD(i),'r-.');
title('Plot 5');
legend('Cable A','Cable C','Cable D');
xlabel('M (kg)');
ylabel('Tension (N)');
pause
plot(Mvector,FA(i)/(mA*g),'k');
title('Plot 6');
xlabel('M (kg)');
ylabel('mu');
0 commentaires
Réponse acceptée
Star Strider
le 25 Mai 2020
You are only plotting one point (that being the last point) and it is not possible to plot lines with only one point.
Try this:
Mvector=linspace(0,30,100);
figure
plot(Mvector, aA,'g',Mvector,aB,'b-.');
title('Acceleration');
legend('Disk A','Mass B');
xlabel('M (kg)');
ylabel('Acceleration (m/s^2)');
% pause
figure
plot(Mvector,aA,'g',Mvector,aB,'b-.');
title('Acceleration');
legend('Disk A','Mass M');
xlabel('M (kg)');
ylabel('acceleration (m/s^2)');
% pause
figure
plot(Mvector, FA,'k');
title('Plot 3');
xlabel('M (kg)');
ylabel('FA (N)');
% pause
figure
plot(Mvector,TA,'g',Mvector,TB,'b-.');
title('Plot 4');
legend('Cable A','Cable B');
xlabel('M (kg)');
ylabel('Tension (N))');
% pause
figure
plot(Mvector,TA,'g',Mvector,TC,'b:',Mvector,TD(i),'r-.');
title('Plot 5');
legend('Cable A','Cable C','Cable D');
xlabel('M (kg)');
ylabel('Tension (N)');
% pause
figure
plot(Mvector,FA/(mA*g),'k');
title('Plot 6');
xlabel('M (kg)');
ylabel('mu');
Also, you were overplotting each new plot on the previous one, erasing the previous one. Since it appears you want them on separate figures, this slightly revised code does that. If you want to plot all of them on the sane axes, use the hold function.
7 commentaires
Plus de réponses (0)
Voir également
Catégories
En savoir plus sur National Instruments Frame Grabbers dans Help Center et File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!