Getting error while running Arduino in external mode in simulink(r2012b)
3 vues (au cours des 30 derniers jours)
Afficher commentaires plus anciens
Respected sir, I am getting following error when I am trying to communicate arduino mega 2560 with simulink in external mode, I have also followed all instruction provided in manual(from matlab) error:- "Error occurred while executing External Mode MEX-file 'ext_serial_win32_comm':Timed-out waiting for first connect response packet." ,plz help
3 commentaires
Malith Fernando
le 22 Fév 2017
Modifié(e) : Walter Roberson
le 9 Avr 2017
Having the similar problem
Build process completed successfully
Error occurred while executing External Mode MEX-file 'ext_serial_win32_comm_rtt':
Failed to connect to the target. A time-out occurred while waiting for the connection response from the target. Possible reasons for the time-out:
a) The target is not switched on.
b) The target is not connected to your host machine.
c) The application for the model is not running on the target. You might have clicked the Stop button. If the Run button is not dimmed, click it. Otherwise, click the Build button, which downloads and runs your application on the target.
Réponses (3)
Gergely Takács
le 13 Fév 2014
Hello all;
Same problem here. The external mode does work with certain very simple models. For example an analog input>double conversion>Embedded function for a y = u(5/1024); voltage conversion> scope combination works flawlessly. However, as soon as I add another analog input, I get the same error as sri. The minimum not working example is two analog inputs with two scopes. The exact procedure goes like this: the building process is successful, and it says " Model Successfully Downloaded to Arduino Mega 2560 ". But then, upon trying to connect to the board, the process hangs at " Initializing " and after a while I get " Error occurred while executing External Mode MEX-file 'ext_serial_win32_comm': Timed-out waiting for first connect response packet. " I've also tried to run a simple embedded function with an extended Kalman filter inside (no inputs or outputs on Arduino) and a scope, but the same thing happened.
Details:
- MATLAB Version: 8.0.0.783 (R2012b)
- Operating System: Microsoft Windows 7 Version 6.1 (Build 7601: Service Pack 1)
- Java Version: Java 1.6.0_17-b04 with Sun Microsystems Inc. Java HotSpot™ 64-Bit Server VM mixed mode
- Board: Arduino Mega 2560
- Fixed Step Discrete Solver (tried 1, 0.1 sec)
- External mode enabled.
- Baud rates 9600
- Overrun detection enabled, on pin 13
- Computer Lenovo ThinkPad T410i
Any help would be much appreciated.
Gergely
1 commentaire
Loup Letac
le 9 Avr 2017
Modifié(e) : Walter Roberson
le 9 Avr 2017
Any news about this problem ? I have the same, even with one analog input and one output. But the program does compile properly.
Thank you
----------------------------------------------------------------------------------------------------
MATLAB Version: 9.1.0.441655 (R2016b)
MATLAB License Number: ••••••
Operating System: Microsoft Windows 7 Professional Version 6.1 (Build 7601: Service Pack 1)
Java Version: Java 1.7.0_60-b19 with Oracle Corporation Java HotSpot(TM) 64-Bit Server VM mixed mode
----------------------------------------------------------------------------------------------------
MATLAB Version 9.1 (R2016b)
Simulink Version 8.8 (R2016b)
Rolfe Dlugy-Hegwer
le 28 Août 2013
Thanks for your message, Shri. It looks like a problem with the physical connection or configuration. First test that you can run a model on the Mega 2560, without External mode. Then, enable External mode using ONLY those settings mentioned in http://www.mathworks.com/help/simulink/ug/remotely-monitoring-and-controlling-an-application-on-arduino-hardware.html
1 commentaire
zaid_mka
le 25 Déc 2013
hey Rolfe Dlugy-Hegwer ,,, i have this problem here how can i fix it ? http://www.mathworks.com/matlabcentral/answers/106975-error-downloading-simulink-model-to-arduino-mega-2560-rev3
Rok Avsec
le 20 Déc 2018
I had the same problem. Go and readthis thread. I spent 2 days looking arround but this did the trick in 1 minute.
0 commentaires
Voir également
Catégories
En savoir plus sur Arduino Hardware dans Help Center et File Exchange
Produits
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!