Function after spline fitting

4 vues (au cours des 30 derniers jours)
Balint Egri
Balint Egri le 26 Mar 2021
Commenté : Balint Egri le 1 Avr 2021
Hello hello,
I have a question regarding spline fitting. I have the below curve which obtained by fitting a curve on my test data. (this is the roll angle of an IMU data) I used spline fitting and piecewise polynomial to have it smoothend by increasing the increment (time) 10 times.
I want to use this data in another program to create motion on a body.
Is it possible to obtain this curve az a sin/cos function? Or any kind of function?
Thank you for your answers:)
  1 commentaire
Balint Egri
Balint Egri le 1 Avr 2021
I attached here the .mat file where I am doing the curve fitting. I also attached the .txt files which the spli fitting reads. Hope this can help.
Do you think the fft could work with this set of data?

Connectez-vous pour commenter.

Réponses (2)

John D'Errico
John D'Errico le 26 Mar 2021
You cannot extract any "function" from a spline. At least, if you did, it would not be anything you could read or type without many, many coefficients, that you problably would not find useful.
In order to build an approximation using a sum of sin and cosine terms, you will usually use a tool like the curve fitting toolbox, but the optimization or stats toolbox can also do nicely. you can also do it without any such toolbox, but it wil take more effort. So knowing what you have would be important. Also, it would greatly help to have your data.
  1 commentaire
Balint Egri
Balint Egri le 1 Avr 2021
I commented on the post with my data. Check it out if you think the curve fitting is a working solution:)

Connectez-vous pour commenter.


Star Strider
Star Strider le 26 Mar 2021
The easiest way to fit it to a sin or cos function (or both) to it would be to take the Fourier transform of it using the fft function. It would then be possible to reconstruct it in the time domain from the real and imaginary coefficients at the frequencies you want to use for that. (It would likely require several terms to get a decent approximation to the data.)
  1 commentaire
Balint Egri
Balint Egri le 1 Avr 2021
I commented my data under the post. Check it out if you think the fft is a working solution. I will lok at it later.

Connectez-vous pour commenter.

Produits


Version

R2020b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by