Dual Motor Control with TI LAUNCHXL-F28069M LaunchPad

Field-Oriented Control with TI LAUNCHXL-F28069M, BOOSTXL-DRV8301 inverters and 2 PMS motors

This example shows how to use a closed-loop Field-Oriented Control (FOC) algorithm to regulate the speed and torque of a 2 three-phase Permanent Magnet Synchronous Motors (PMSM). This example uses C28x peripheral blocks and C28x DMC library blocks from the Embedded Coder Support Package for Texas Instruments C2000 Processors.

For newer versions and other hardware setup, check the shipping version of this example on this page: https://www.mathworks.com/help/ti-c2000/ug/dual-motor-dyno-example.html

Required Hardware:

- TI LAUNCHXL-F28069M LaunchPad (http://www.ti.com/tool/LAUNCHXL-F28069M)

- 2 BOOSTXL-DRV8301 with a 3-phase brushless motor and a 12-24V power supply (http://www.ti.com/tool/BOOSTXL-DRV8301)

- 2 PMSM (i.e. 2MTR-DYNO setup http://www.ti.com/tool/2mtr-dyno)

More information on how the models have been created and how to use them in the following video:

http://youtu.be/ncM7N-hLKQM