photo

Abhi Shankar Abhinav

MathWorks

Last seen: 6 jours il y a |  Actif depuis 2020

Followers: 0   Following: 0

Statistiques

  • Knowledgeable Level 1
  • First Review
  • Revival Level 1
  • First Answer

Afficher les badges

Feeds

Afficher par

Réponse apportée
Not able to run open_system('mcb_pmsm_foc_sensorless_nucleo_f401re.slx');
Please reach out to support as this maybe specifc to your install and tools on the license. https://ch.mathworks.com/support/co...

plus d'un an il y a | 0

Réponse apportée
F28379D PMSM Current Control
Offset angle incorrect value will have an effect on the control, since the control is tied to dq refrence framework. Offset valu...

plus d'un an il y a | 0

Réponse apportée
How will I simulate a circuit of Bidirectional DC-DC converter fed drive using MOSFETs for electric vehicle system ?
@chandan solanki If you need a system level model for testing out the charging topology a starting place would be EV Reference...

plus d'un an il y a | 0

Réponse apportée
Electric Vehicle Model using PMSM
Dakai Hu answered the question in the comment above. Since the question does not specify fidelity and usecase. I wanted to add ...

plus d'un an il y a | 0

Réponse apportée
How can I use a Single Phase programmable voltage source in Specialized Power Systems Simulink?
Hello, You can use the controlled voltage source that will allow you to specify the voltage profile either using Simulink logic...

presque 2 ans il y a | 0

Réponse apportée
逆变器如何和电压或者电流相连。
Hello, Because of my limited language skills. I did not get the question. But, based on the image I am summarizing that you are...

presque 2 ans il y a | 0

Réponse apportée
Electric vehicle simulation in simscape domain
Hi Ankan, On the first issue, can you share the model to give some more insight. I would suggest at looking at the initializati...

environ 2 ans il y a | 0

Réponse apportée
Modelling Electric vehicle with dual motor setup.
There are couple of examples that can be used as starting point for putting together two motors on the same shaft that you are l...

environ 2 ans il y a | 0

Réponse apportée
coupling two induction motor in simscape
There are couple of examples that can be used as starting point for putting together two induction motors on the same shaft that...

environ 2 ans il y a | 0

Réponse apportée
Distribution line is not making connection with sinusoidal source & d-q based model of induction motor. What is a way to connect the distribution line with them?
Hi Sushant, These are two different modelling environments Simulink and Specialized Power Systems (formerly SimPowerSystems), b...

environ 2 ans il y a | 0

Réponse apportée
Using a circuit from one file in another
Hi, Its possible to have multiple simscape networks in the same simulink model. In that case we can use Simulink to manually co...

environ 2 ans il y a | 0

Réponse apportée
Possible mistake in PMSM current_controllers in a demo model
In thi reference example the controller does not take the cross coupling into account for the closed loop control. For closed co...

environ 2 ans il y a | 1

| A accepté

Réponse apportée
please help regarding temperature measure of a electrical network
Error Simulink is thorwing indicates that the solver does not have enough information to solve the equations. Add an electrical ...

plus de 2 ans il y a | 0

Réponse apportée
Time Delay in Real-time Simulation with Vehicle Dynamics Blockset Interface for Unreal Engine 4
I suspect a hardware issue (GPU/ UDP) that is causing the drift between the real-time platform and game to be large. Is your set...

presque 5 ans il y a | 0