photo

Jon Boerner

MathWorks

Actif depuis 2012

Followers: 0   Following: 0

Message

Statistiques

All
  • Knowledgeable Level 3
  • Knowledgeable Level 2
  • First Answer
  • Solver

Afficher les badges

Feeds

Afficher par

Réponse apportée
Simulink Real Time are the benchmark results acceptable?
You might want to take a look at this link, and see if anything is relevant: <http://www.mathworks.com/matlabcentral/answers/...

environ 10 ans il y a | 0

| A accepté

Réponse apportée
Link Simulink Design Verifier Report to different model file?
I do not believe there is a way to do that via any options anywhere. It might be easiest to just find/replace instances of the t...

environ 10 ans il y a | 0

| A accepté

Réponse apportée
Linux UDP Send block fails to send to broadcast address
Did you happen to try setting the IP Address value in the block to '127.0.0.1'? The dialog says "'255.255.255.255' for broadcast...

environ 10 ans il y a | 0

Réponse apportée
Is it possible to modify the matrices in a genss ?
I don't know if you can change the size, but I think you could create some more tunable parameters to fill B, but make sure they...

environ 10 ans il y a | 0

| A accepté

Réponse apportée
Program NXT to write/draw in MATLAB
This is a pretty open-ended question that does not have a straightforward answer. The short answer is that you will probably wan...

environ 10 ans il y a | 0

Réponse apportée
Help with balancing GyroBoy (Lego Mindstorms EV3) using MATLAB
Hi Mohammad, When you say you have programmed the PID controller, using MATLAB, what exactly do you mean? Are you still using...

environ 10 ans il y a | 0

Réponse apportée
Rotations of simulink 3D animation do not correspond to mates in Solidworks assembly
Two things: # If the model appears correctly in the SimMechanics Viewer, I would recommend trying to use the STL files you us...

environ 10 ans il y a | 0

Réponse apportée
How to enable External Mode for a Simulink model containing multiple referred models?
In R2014b, there is not a way to convert model blocks into subsystems. You could potentially write a script to do this, but it w...

environ 10 ans il y a | 0

Réponse apportée
Error installung Peak CAN Support Package
The first error looks like it may have caused the second. And the first error looks like a permissions issue. Maybe try starting...

environ 10 ans il y a | 0

Réponse apportée
Job management, control flow
Hi Benjamin, The easiest way to do this is probably using either the |<http://www.mathworks.com/help/distcomp/batch.html batc...

environ 10 ans il y a | 1

| A accepté

Réponse apportée
Analysis of generated code
It looks like your model is not attached to the question, but here is my best guess at what is happening. You refer to the r...

environ 10 ans il y a | 0

Réponse apportée
How do you get Signal Builder to import a mat file it exported?
When you export data from the Signal Builder in R2011b, it exports it as a structure with all kinds of Signal Builder-specific i...

environ 10 ans il y a | 0

| A accepté

Réponse apportée
Simulink code interface to external C++ application
Hi Anup, I think that the exact behavior you are looking for may be limited to the Embedded Coder product. For Simulink Co...

environ 10 ans il y a | 0

| A accepté

Réponse apportée
Changing the order of stateflow outputs (inputs)
If you open the model explorer for your model, and navigate to the Stateflow chart, you should see all of your inputs and output...

environ 10 ans il y a | 2

| A accepté

Réponse apportée
converting matlab code into simulink
In the mask for the Discrete FIR Filter in Simulink, there is an option to specify the initial states: <</matlabcentral/answe...

environ 10 ans il y a | 0

Réponse apportée
Cannot connect arduino uno to Matlab
The error you are seeing is related to how MATLAB stores and displays its error messages. If you run the following command, w...

environ 10 ans il y a | 0

| A accepté

Réponse apportée
About code génération in Matlab 2014b
You are correct that the file will not be anywhere in your MATLAB installation. That file is actually created during the code ge...

environ 10 ans il y a | 0

Réponse apportée
How can I call a function in simulink that is defined in one of the source file in the Custom Code of the Code generation pane ?
There are a couple options for calling a custom function from your model. The first is to use a MATLAB function block. In a ...

environ 10 ans il y a | 0

Réponse apportée
Unseeded random noise in Simulink
You cannot remove the seed option, but you can use a random seed. For example: <</matlabcentral/answers/uploaded_files/1957...

environ 10 ans il y a | 1

| A accepté

Réponse apportée
Extra dimension on simulink output
This third dimension corresponds to time. |tout| lets you map the output matrix to certain times in the simulation. For example,...

environ 10 ans il y a | 0

| A accepté

Réponse apportée
Does Matlab support bed, wig, and other usual genomics file formats?
I took a quick look through the documentation, and was not able to find anything about those file types. The pages that describe...

environ 10 ans il y a | 1

| A accepté

Réponse apportée
-maxNumCompThreads, hyperthreading, and parpool
Based on my understanding of how MATLAB uses cores/threads, your descriptions of what you can/cannot do are all spot on. <http:/...

environ 10 ans il y a | 0

Réponse apportée
Error: A part name shall not have a forward slash as a last character [M1.5]
To start, SLX files are just ZIP files with a particular set of files and using a particular compression method. Looking arou...

environ 10 ans il y a | 1

| A accepté