How to Calibrate Sensors and Estimate Parameters for motor modeling | Field-Weakening Control of PMSM with Simulink, Part 1

Discover the fundamentals of field-oriented control (FOC) and effectively implement field-weakening control with Simulink for precise control of your permanent magnet synchronous motors (PMSMs) in this MathWorks tutorial series. In Part 1, learn about the essential steps for calibrating your current and position sensors. Explore the process of accurately estimating motor parameters using instrumented test in Motor Control Blockset by collecting data directly from hardware. Learn how to save the estimated values for parameterizing motor models and work with different plant fidelities.

Published: 14 Apr 2021

Learn More

Free Trial Software for Power Electronics Control Design
Learn How to Design and Implement Motor Control Algorithms: Field-Oriented Control of PMSMs with Simulink (4 videos)
Field-Oriented Control of Induction Motors with Simulink and Motor Control Blockset (5:34)
Beyond PID: Exploring Alternative Control Strategies for Field-Oriented Controllers
Optimal Torque Control Workflow for Permanent Magnet Synchronous Motors (41:22)

Hardware-in-the-Loop Testing for Power Electronics Control Design

Read white paper

Feedback

Up Next:

Did you ever need to tweak parameters in your Simulink model to optimize the design – for example, improve performance, minimize cost, reduce actuator size, and increase reliability?  If you answered yes, then attend this MathWorks webinar to learn a

Optimization of Simulink Model Parameters

Related Videos:

Delphi Electronics & Safety discusses best practices for implementing requirements into models that generate efficient code.

Application of Automatic Code Generation for Rapid and...

Design a PID controller for a DC motor modeled in Simulink. Create a closed-loop system by using the PID Controller block, then tune the gains of PID Controller block using the PID Tuner.

PID Controller Design in Simulink

In this webinar, you will learn how to design PID controllers for managing tension in a multistage rolling mill process.

Tension Control | Simulating a Multi-Stage Rolling Mill...

Linearize models and design control systems using Simulink Control Design

What Is Simulink Control Design?

View more related videos