photo

Priya Moorthy

Last seen: 5 jours il y a |  Actif depuis 2018

Followers: 0   Following: 0

Message

Statistiques

  • Knowledgeable Level 3
  • First Answer

Afficher les badges

Feeds

Afficher par

Réponse apportée
how to understand and set the constant and boundarycondition properties.
Hi, Michael, The following post discusses boundary condition vs. constant amount: https://www.mathworks.com/matlabcentral/answ...

20 jours il y a | 0

Réponse apportée
How do I connect data points with a line in a Simbiology XY graph?
Hi, Vivek, It sounds like you would like to plot a scalar value C(t_end) against the scan parameter value L for all the runs. O...

environ un mois il y a | 0

| A accepté

Réponse apportée
Error on simbiology: Unable to load the project because the project format is not compatible with SimBiology. Error using load.
Rebeca, I’m sorry that you have encountered this issue. Could you share the project with us so that we can troubleshoot the iss...

6 mois il y a | 1

Réponse apportée
save parameters after estimates as a variant in simbiology app
Hi, Jong Hyuk Byun, You can right-click on your fit results and select "Create Variant from Estimated Parameter Values...." ...

8 mois il y a | 1

Réponse apportée
How to simulte a chemical reaction at different initial concentratios of reactants in the Simbiolgy interfase of Matlab?
Hi, Luis, There are three different ways to change the initial values for a quantity (species, parameter or compartment) in you...

10 mois il y a | 1

| A accepté

Réponse apportée
How to move around subplots generated by sbiopredictionci?
Hi, Rebeca, Starting in R2023b, SimBiology uses tiledlayout to manage the layout of axes of its plots. This change improves the...

12 mois il y a | 0

| A accepté

Réponse apportée
Setting initial values for different individuals
Bohao, Every quantity (species, parameter or compartment) has an initial value that is set on the model. Thus, when you simulat...

12 mois il y a | 0

| A accepté

Réponse apportée
Export SimBiology model diagram
Hi, Johannes, In R2021b, we added support for exporting the diagram as a pdf or image file, but still from within the SimBiolog...

environ un an il y a | 1

| A accepté

Réponse apportée
Where is data saved when the following message shows up: Out of memory. Program data exceed 2 GB and cannot be saved using the default MAT-file
Rebeca, This message usually indicates that program data were saved, but in MAT-file version 7.3 instead of the default version...

environ un an il y a | 0

| A accepté

Réponse apportée
How can I format plot and symbol lines and colors in Simbiology Model Analyzer
Hi, Jim, Thanks for your feedback. The SimBiology Model Analyzer currently only allows a user to apply a single visual channe...

plus d'un an il y a | 0

| A accepté

Réponse apportée
Is it possible to set all species units at the same time?
Rebeca, You can use your Ctrl/Cmd-A in the diagram to select everything in your model. Then, you can go to the Property Editor ...

plus d'un an il y a | 1

| A accepté

Réponse apportée
Simbiology "Project Save Error"
Hi, Jim, I'm sorry that you are running into issues while saving your project. The behavior you describe sounds like what we s...

environ 2 ans il y a | 0

| A accepté

Réponse apportée
The most recent version of Matlab (R2022b) does not open a SimBiology file (.sbproj)
Hi, Christos, The .sbproj file extension represents a SimBiology project file that can be opened with the SimBiology Model Anal...

environ 2 ans il y a | 1

Réponse apportée
Can I modify the data after the datasheet loaded in the Matlab project?
Hi! Just to clarify, I think you are referring to a SimBiology project rather than a MATLAB project. You are correct; you cann...

environ 2 ans il y a | 1

Réponse apportée
Why the simulated plot is different when select style between "Time" and "Percentile"?
Hi, Percentile plots are usually meant for visualize a large number of simulation results. Each individual timecourse is inter...

environ 2 ans il y a | 0

Réponse apportée
Simbiology createSimFunction data access
Mohammad, The SimBiology Model Analyzer app introduced the percentile plot type in R2021b. You can use this plot type to visua...

environ 3 ans il y a | 1

Réponse apportée
Change default plot settings in SimBIology Model Analyzer App
Hi, Greg, thank you for the suggestion. Currently, it is not possible to change the default font, font size, etc. for a plot in...

presque 4 ans il y a | 1

| A accepté

Réponse apportée
Add a new unit in SimBiology app
Hi, Jacopo, Unfortunately, the instructions in the error message are outdated. In R2019b, you can access the Units Library fro...

plus de 4 ans il y a | 1

| A accepté

Réponse apportée
How can I plot only one fitted variable after using sbiofit?
Hi, Jim, Currently, SimBiology plot functions do not support using multiple y-axes. You can pass a custom plot function to sbio...

environ 5 ans il y a | 0

Réponse apportée
simbiology question- how to overlay observed data with simulation
Brett, In the current version of the SimBiology Desktop, experimental and simulation data cannot be viewed together in the pl...

environ 6 ans il y a | 1

| A accepté

Réponse apportée
SimBiology sensitivity analysis warning
Hi, Wendy, This warning message is one that is usually displayed at the command line if users are simulating a model and have...

plus de 6 ans il y a | 1